DP-110-GRAY-200ML 3M, DP-110-GRAY-200ML Datasheet - Page 6

• Manufacturer Part Number: DP-110-GRAY-200ML
• Description: Adhesive; Epoxy; Gray; Duo-Pak; 200 mL Tube
• Manufacturer: 3M

Specifications of DP-110-GRAY-200ML

• Chemical Component: Butadiene/Epoxy Resin/Hydrogenated Polyphenyls/Hydrogenated Terphenyl/Methacrylate/Styrene Polymer
• Chemical System: Epoxy
• Color: Gray
• Dispensing Method: Syringe
• Primary Type: Adhesive
• Time, Drying: Air Dry for 15 minutes, Force Dry for 10 minutes @ 66 °C +⁄- 23 °C (Aluminum Surface), If 3M™ Scotch-Weld™ Structural Adhesive Primer EC1945 B⁄A is Used, Apply a Thin Coating (0.5 mils) on the Metal Surfaces to be Bonded, Air Dry for 60 minutes, then Cure
• Time, Setting: 15 min. (Aluminum), 60 min. (Steel)
• Weight: 200 ml

Material Safety Data Sheet
Copyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
Product Use:
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Paste
Odor, Color, Grade: White, very slight odor.
General Physical Form: Liquid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
_________________________________________________________________________________________________
MATERIAL SAFETY DATA SHEET 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-110, Gray (Part B) or 3M(TM) Scotch-Weld(TM)
Epoxy Adhesive 110 B/A, Gray (Part B)
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
SECTION 2: INGREDIENTS
SECTION 3: HAZARDS IDENTIFICATION
Ingredient
Epoxy Resin
Methacrylate/Butadiene/Styrene Polymer
Hydrogenated Terphenyl
Hydrogenated Polyphenyls
MANUFACTURER: 3M
PRODUCT NAME: 3M(TM) Scotch-Weld(TM) Epoxy Adhesive DP-110, Gray (Part B) or 3M(TM) Scotch-
Document Group: 11-3320-6
Specific Use:
Intended Use:
DIVISION: Industrial Adhesives and Tapes Division
Weld(TM) Epoxy Adhesive 110 B/A, Gray (Part B)
Base of 2-Part Epoxy Adhesive
Industrial use
May cause allergic skin reaction.
C.A.S. No.
25068-38-6
25053-09-2
61788-32-7
68956-74-1
% by Wt
< 1.5
60 - 100
10 - 30
5 - 10
Page 1 of 8