CLC006AJE-TR13 National Semiconductor, CLC006AJE-TR13 Datasheet - Page 9

• Manufacturer Part Number: CLC006AJE-TR13
• Description: IC CABLE DRVR SER DGTL ADJ 8SOIC
• Manufacturer: National Semiconductor
• Series: CLCr
• Type: Driverr

Specifications of CLC006AJE-TR13

• Number Of Drivers/receivers: 1/0
• Voltage - Supply: 4.5 V ~ 5.5 V
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• For Use With: SD901EVK - BOARD EVAL CLC014, 016, 011, 006SD006EVK - BOARD EVALUATION CLC006
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Protocol: -
• Other names: *CLC006AJE-TR13

OUTPUT RISE AND FALL TIMES
Output load capacitance can significantly affect output rise
and fall times. The effect of load capacitance, stray or other-
wise, may be reduced by placing the output back-match
resistor close to the output pin and by minimizing all intercon-
necting trace lengths. Figure 13 shows the effect on risetime
of parallel load capacitance across a 150Ω load.
9
PCB Layout Recommendations
Printed circuit board layout affects the performance of the
CLC006. The following guidelines will aid in achieving satis-
factory device performance.
•
•
•
•
Use a ground plane or power/ground plane sandwich
design for optimum performance.
Bypass device power with a 0.01 µF monolithic ceramic
capacitor in parallel with a 6.8 µF tantalum electrolytic
capacitor located no more than 0.1” (2.5 mm) from the
device power pins.
Provide short, symmetrical ground return paths for:
— inputs,
— supply bypass capacitors and
— the output load.
Provide short, grounded guard traces located
— under the centerline of the package,
— 0.1” (2.5 mm) from the package pins
— on both top and bottom of the board with connecting
vias.
FIGURE 13. Rise Time vs C
L
www.national.com
10008416