S3K2U1440-5 SOLA HEVI DUTY, S3K2U1440-5 Datasheet - Page 23

• Manufacturer Part Number: S3K2U1440-5
• Description: UPS - Uninterruptible Power Supplies 1440VA/1080W 230V
• Manufacturer: SOLA HEVI DUTY

Specifications of S3K2U1440-5

• Power Rating: 1440 VA
• Output Voltage Rating: 230 V
• Number Of Outlets: 8
• Interface Port: USB / SNMP
• Runtime (full Load): 11 min
• Runtime (half Load): 26 min
• Topology: Line Interactive
• Tower / Rackmount: Tower / Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.4
External Battery Cabinet Installation
Optional Sola/Hevi-Duty external battery cabinets may be connected to the UPS to provide additional
battery run time. External battery cabinets are designed to be placed all on one side of the UPS or
stacked beneath the UPS. The run time is limited to a maximum of four (4) hours.
1. Visually inspect the external battery cabinet for freight damage. Report damage to the carrier
2. The rack-mount handles are shipped with the external battery cabinet and may be installed at
3. Fixed rails and securing hardware ship with the external battery cabinet. Fasten the fixed rails
4. Use the support bases included with the UPS for the tower option to prevent tip-over. One
5. Connect the supplied external battery cabinet cable to the rear of the external battery cabinet,
6. The UPS is now equipped with additional backup battery run time. For approximate battery run
!
!
and your local distributor, Sola/Hevi-Duty Representative or Sola/Hevi-Duty Technical Services.
this time (see 5.3 - Rack-Mount UPS Conversion and Installation).
into position with the screws per the instructions included with the UPS. Repeat
Steps 1 through 10 from 5.3 - Rack-Mount UPS Conversion and Installation.
additional set of support base spacers ships with each external battery cabinet.
then to the rear of the UPS, as shown at right.
times, refer to Table 6 - Battery run times.
CAUTION
The external battery cabinet(s) are heavy (see 12.0 - Specifications (Sechnische Daten)).
External battery cabinets can be used in rack-mount or tower configuration. Take proper
precautions when lifting them.
VORSICHT
Externe Batteriegehäuse sind schwer (siehe 12.0 - Technische Daten). Externe
Batteriegehäuse können in einer Gestellmontage- oder Turmkonfiguration eingesetzt werden.
Ergreifen Sie die entsprechenden Vorsichtsmaßnahmen, wenn sie gehoben werden müssen.
1
2
3
4
INTELLISLOT
BATTERY
CONNECTOR
PUSH TO RESET
BREAKER
INPUT
INPUT
17
PHONE / FAX / MODEM / NETWORK
IN
PROTECTION
OUT
LOAD 1
LOAD 2
BATTERY
CONNECTOR
BATTERY
CONNECTOR
1440VA/DC 48V/30A
1000VA/DC 48V/20A
+
-
Installation