DP-190 (Translucent) 3M, DP-190 (Translucent) Datasheet - Page 4

• Manufacturer Part Number: DP-190 (Translucent)
• Description: Chemicals 1.7 OZ 2 PART EPOXY TRANSLUCENT
• Manufacturer: 3M

Specifications of DP-190 (Translucent)

• Product: Adhesives
• Other names: 02120087219 62328614359 DP-190

3M
Epoxy Adhesives
DP190 Translucent and Gray
Typical Adhesive
Performance
Characteristics
(continued)
Footnotes:
12. Overlap shear (OLS) strengths
13. Solvent resistance was determined
were measured on 1 in. wide 1/2
in. overlap specimens. These
bonds were made individually
using 1 in. x 4 in. pieces of
substrate. The thickness of the
bond line was 0.005-0.008 in. All
strengths were measured at 70°F
(21°C) except were noted. (Test
per ASTM D 1002-72.)
The separation rate of the testing
jaws was 0.1 in. per minute for
metals, 2 in. per minute for plastics
and 20 in. per minute for rubbers.
The thickness of the substrates
were: steel, 0.060 in.; other
metals, 0.05-0.064 in.; rubber,
0.125 in.; plastics, 0.125 in.
using cured (24 hrs RT + 2 hrs
160°F [71°C] samples (1/2 in. x 4
in. x 1/8 in. thickness) immersed in
the test solvent for 1 hour and 1
month. After the allotted period of
time the sample was removed and
visually examined for surface
attack as compared to the control.
™
Scotch-Weld
Environmental Aging
(OLS on Etched Aluminum)
Note: The following technical information and data should be considered representative
Overlap Shear Strength vs Temperature
(Bonds cured 24 hr @ RT + 2 hrs @ 160°F [71°C]) Bonds tested at:
180°F Peel Strength vs Temperature
(Bonds cured 24 hr @ RT + 4 hrs @ 160°F [71°C]) Bonds tested at:
Solvent Resistance
24 hrs RT + 2 hrs @ 160°F (71°C)
24 hrs RT + 2 hrs @ 240°F (115°C)
1 wk RT + wk @ 90°F/90% RH
1 wk RT + 1 wk 248°F (120°C)
1 wk RT + 1 wk H
-67°F (-55°C)
70°F (21°C)
120°F (49°C)
150°F (66°C)
180°F (82°C)
-67°F (-55°C)
70°F (21°C
120°F (49°C)
150°F (66°C)
180°F (82°C)
Acetone
Isopropyl Alcohol
Freon TF
Freon TMC
1,1,1-Trichlorethane
RMA Flux
Key: A - Unaffected, B - Slight Attack, C - Moderate/Severe Attack
™
or typical only and should not be used for specification purposes.
2
O Immersion
13
Scotch-Weld Epoxy Adhesive
Scotch-Weld Epoxy Adhesive
Scotch-Weld Epoxy Adhesive
- 4 -
12
DP190 Translucent
DP190 Translucent
DP190 Translucent
One Hour/One Month
Bonds tested after:
3500 psi
1200 psi
20 piw
290 psi
200 psi
160 psi
3 piw
3 piw
2 piw
1 piw
A/A
A/A
A/A
A/B
A/A
A/A
12
3M™ Scotch-Weld™
DP190 Translucent
Epoxy Adhesive
12
1700 psi
3200 psi
1400 psi
3500 psi
1700 psi
Scotch-Weld Epoxy Adhesive
Scotch-Weld Epoxy Adhesive
Scotch-Weld Epoxy Adhesive
One Hour/One Month
3M™ Scotch-Weld™
DP190 Gray
DP190 Gray
DP190 Gray
1500 psi
2500 psi
1000 psi
Epoxy Adhesive
20 piw
10 piw
600 psi
400 psi
3 piw
4 piw
2 piw
A/A
A/A
A/A
A/A
A/A
A/A
DP190 Gray
2500 psi
3000 psi
2400 psi
3500 psi
2500 psi