DP420-BLACK-1.25OZ 3M, DP420-BLACK-1.25OZ Datasheet
DP420-BLACK-1.25OZ
Specifications of DP420-BLACK-1.25OZ
DP420-BLACK-1.25OZ Summary of contents
Page 1
... Controlled flow (3M™ Scotch-Weld™ Epoxy Adhesive DP420 NS Black) • Recognized as meeting – Underwriters Laboratory Horizontal Burn Flammability Test (3M™ Scotch-Weld™ Epoxy Adhesive DP420 Off-White) • Low halogen content (3M™ Scotch-Weld™ Epoxy Adhesive DP420 LH) or typical only and should not be used for specification purposes. ...
Page 2
... Scotch-Weld™ Epoxy Adhesive DP420 Black and 3M™ Scotch-Weld™ Epoxy Adhesive DP420 Off-White, respectively as described by data in the following sections of this technical data sheet. An exception to this is the concentration of halogens in Scotch-Weld DP420 LH. Scotch-Weld DP420 form of Scotch-Weld DP420 Off-White that can be considered “low halogen”. Low halogen is defined by the Electrotechnical Commission (IEC) 61249-2-21 standard as having less than 900 ppm chlorine, 900 ppm bromine, and less than 1500 ppm total chlorine and bromine ...
Page 3
... Scotch-Weld ™ Epoxy Adhesive DP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH Typical Curing Note: The following technical information and data should be considered representative Characteristics Rate of Strength Build-Up Aluminum, Overlap Shear (7 mil Bondline) (ASTM D 1002-72) Bonds Tested at 73°F (23°C) 3M™ ...
Page 4
... Scotch-Weld ™ Epoxy Adhesive DP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH Typical Adhesive Note: The following technical information and data should be considered representative or typical only and should not be used for specification purposes. Performance Substrates and Testing Characteristics A ...
Page 5
... Scotch-Weld ™ Epoxy Adhesive DP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH Typical Adhesive Note: The following technical information and data should be considered representative Performance Characteristics Substrates and Testing (continued) (continued) Aluminum, T-Peel (PIW), at Temperature -67°F (-55°C) 73°F (23°C) 180° ...
Page 6
... Scotch-Weld ™ Epoxy Adhesive DP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH Typical Adhesive Note: The following technical information and data should be considered representative Performance Characteristics Substrates and Testing (continued) (continued) Environmental Resistance Aluminum (Etched) Measured by Overlap Shear Tested @ 73°F (23°C) (PSI) Environment 73° ...
Page 7
... Handling/Application Directions for Use Information 3M™ Scotch-Weld™ Epoxy Adhesive DP420 is supplied in dual syringe plastic duo- pak cartridges as part of the 3M™ EPX™ Applicator System. The duo-pak cartridges are supplied in 37 ml, 200 ml and 400 ml configurations. To use the EPX cartridge system simply insert the duo-pak cartridge into the EPX applicator. Next, remove the duo-pak cartridge cap and expel a small amount of adhesive to be sure both sides of the duo-pak cartridge are flowing evenly and freely ...
Page 8
... Scotch-Weld ™ Epoxy Adhesive DP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH Surface Preparation (continued) B. Oakite Degrease C. MEK/Abrade/MEK D. Isopropyl Alcohol Wipe Only Surface Preparation E. Isopropyl Alcohol/Abrade/Isopropyl Alcohol Surface Preparation 4. Dry – air dry approximately 15 minutes followed by force dry at 140°F (60° ...
Page 9
... Scotch-Weld ™ Epoxy Adhesive DP420 Black • DP420 NS Black • DP420 Off-White • DP420 LH Storage Store products at 60-80°F (15-27°C) or refrigerate for maximum shelf life. Shelf Life These products have a shelf life of 15 months in original containers at room temperature. Precautionary Refer to Product Label and Material Safety Data Sheet for health and safety information before using this product ...