WLNG-EK-DP551 Quatech, WLNG-EK-DP551 Datasheet - Page 4

• Manufacturer Part Number: WLNG-EK-DP551
• Description: WiFi / 802.11 Modules & Development Tools AIRBORNE EVAL KIT EMBEDDED MODULES
• Manufacturer: Quatech
• Series: Airborne™r
• Type: Transceiver, 802.11 b/gr

Specifications of WLNG-EK-DP551

• Mfg Application Notes: Transition to DP550 Devices AppNote
• Frequency: 2.4GHz ~ 2.4835GHz
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Airborne Modules

Quatech, Inc
3.
4.
5.
100-8002-110
Determine and Store the Access Point SSID
On the Host computer, use the terminal emulation program to type the following CLI
commands in the order shown:
If your access point has security enabled, you will also need to use the CLI to enter
those parameters (See the Enterprise CLI Reference Guide for details). That setup is
outside the scope of this quick-start guide, which assumes that the AP being tested with
has no security.
After issuing the commands, press the reset switch (SW2) on the EVB. The EVB restarts
and the RF_ACT LED blinks to show that the module is searching for an AP. Once the
module has found and associated to the AP entered using the wl-ssid command the
RF_ACT LED will turn on continuously.
Determine the Module’s IP address
On the Host computer, use the terminal emulation program to type the following CLI
commands:
Accessing the Module Using Telnet
On the Remote computer, use HyperTerminal to start a Telnet session. In the first
screen, name the session ‘TCP <Module IP>’ (for reference purposes only), click on any
icon you want to associate with this Telnet session, and click OK. In the next screen,
click TCP/IP (Winsock) for Connect Using. In the Host Address field, type the module’s
IP address. Leave the default Port Number value of 23 and click OK.
CLI Command
wl-scan<CR>
wl-ssid [SSID]<CR>
commit<CR>
CLI Command
auth dpac dpac <CR>
wl-ip<CR>
4
Description
The module scans for APs and returns
information on each one it discovers. Note the
SSID value that is returned, as you will need to
enter it in the next command
Associates the module with the AP whose [SSID]
you specify. [SSID] is the value returned by the
wl-scan command.
Stores the information to flash memory.
Description
Authenticate with the device server.
The module returns the IP address assigned to it
by the AP.
Enterprise Eval Kit Quick Start Guide
Connect with Reliability