E5061BEP-235 Agilent Technologies Test Equipment, E5061BEP-235 Datasheet - Page 2

• Manufacturer Part Number: E5061BEP-235
• Description: E5061B Express - S-Parameter Test Set, 100kHz to 3 GHz, 50 Ohm
• Manufacturer: Agilent Technologies Test Equipment

Quick Fact Sheet
Agilent E5061BEP-115/235 ENA Series Network Analyzer – Express Confi guration
Option 115, Transmission/Refl ection test set, 100 kHz – 1.5 GHz vector network analyzer
Option 235, S-parameter test set, 100 kHz – 3 GHz vector network analyzer
Model
Options
Recommended Accessories
For Type-N
For 3.5 mm
Product specifi cations and descriptions in this document subject to change without notice.
© Agilent Technologies, Inc. 2011, Printed in USA, April 20, 2011
5990-7813EN
Options
E5061BEP
Options
E5061BEP-115
E5061BEP-235
Model
N6314A
85032E
85092C
Model
11500E
85033E
85093C
Description
Test port cable, Type-N (m-m), 50 Ω
Economy Mechanical Calibration Kit, DC to 6 GHz,
Type-N, 50 Ω
RF Electronic Calibration Module, 300 kHz to 9 GHz,
Type-N, 50 Ω, 2-port
Description
Test port cable, 3.5mm (m-m), 50 Ω
Standard Mechanical Calibration kit, DC to 9 GHz, 3.5mm 50 Ω
RF Electronic Calibration Module, 300 kHz to 9 GHz, 3.5mm,
50 Ω, 2-port
Description
ENA Series Network Analyzer – Express Confi guration
Description
E5061B Express - Transmission/Refl ection Test Set,
100 kHz to 1.5 GHz, 50 Ω
E5061B Express – S-parameter Test Set,
100 kHz to 3 GHz, 50 Ω
Key specifi cations
www.agilent.com/find/express
www.agilent.com/find/express-e5061b
For additional information about the E5061BEP, refer to following literature.
Technical overview: 5990-7847EN
To find a distributor in your area, go to www.agilent.com/find/distributors
Frequency
Test set
Port impedance
Port output power
Dynamic range
Trace noise
Sweep types
Ecal support
Opt. 115 : 100 kHz to 1.5 GHz
Opt. 235 : 100 kHz to 3 GHz
Opt. 115 :Transmission /Refl ection test set (S
Opt. 235: S-parameter test set (S
50 Ω
–45 to 5 dBm (at 100 kHz to 300 kHz)
–45 to 10 dBm (at 300 kHz to 1.5/3 GHz)
> 120 dB (at 1 MHz to 1.5/3 GHz, IFBW = 10 Hz)
0.005 dB rms
Linear, log, segment, power
Yes (2-port RF ECal module cannot be used in 100 kHz to 300 kHz range.)
11
, S
21
, S
12
, and S
11
and S
22
)
21
)