0638508070 Molex Inc, 0638508070 Datasheet - Page 6

• Manufacturer Part Number: 0638508070
• Description: TOOL KIT
• Manufacturer: Molex Inc

Specifications of 0638508070

• Lead Free Status / Rohs Status: RoHS Not Applicable

T2 Terminator for “Micro-Fit 3.0™” Crimp Terminals
Doc No. 63850-8000
Revision: B
NOTES
1. Molex recommends an extra perishable tooling kit be maintained at your facility.
2. Verify tooling alignment by manually cycling the press before crimping under power. Check that all screws are tight.
3. Slugs, Terminals, Dirt and Oil should be kept clear of work area.
4. This Terminator should be only used in a Molex TM42, TM40, or 3BF Press with a Base Unit adaptor.
5. Wear safety glasses at all times.
6. For recommended maintenance refer to the TM40, TM42 Manual.
CAUTION: To prevent injury never operate this Terminator without the guards supplied with the press or in place. Reference
the TM42 press manufacturer’s instruction manual.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
Release Date: 02-25-05
Revision Date: 02-25-05
Visit our Web site at http://www.molex.com
Molex Application Tooling Group
Fax: [phone]
Naperville, IL 60563
Tel: [phone]
1150 E. Diehl Road
UNCONTROLLED COPY
Page 6 of 6