11-4945-225-00 3M, 11-4945-225-00 Datasheet - Page 21

• Manufacturer Part Number: 11-4945-225-00
• Description: LCD Touch Panels 17 C1700SS USB, No Bezel
• Manufacturer: 3M
• Series: C1700SSr
• Type: Capacitiver

Specifications of 11-4945-225-00

• Length: 13" (337.9mm)
• Width: 16" (405mm)
• Height: 10.6" (270.3mm)
• Interface: USB
• Diagonal Screen Size: 17" (433mm)
• Lead Free Status / Rohs Status: Details

3M™ MicroTouch™ Display C1700SS Installation Guide
Maintaining Your Touch Display
Touch Sensor Care and Cleaning
CHAPTER 5
Maintenance and Troubleshooting
If you have a problem setting up or using your display, you may be able to solve it
yourself. Before calling 3M Touch Systems, try the suggested actions that are
appropriate to the problems you are experiencing with the display. You may also want to
consult your video card user’s manual for additional troubleshooting advice.
To maintain your display and keep your display operating at peak performance:
•
•
•
The touch sensor requires very little maintenance. 3M Touch Systems recommends that
you periodically clean the glass touch sensor surface.
Typically, isopropyl alcohol and water solution ratio of 50:50 is the best cleaning agent
for your touch sensor. You can also use straight isopropyl alcohol. Be sure to follow
solvent manufacturer's precautions and directions for use when using any solvents.
•
•
•
•
Keep your display and sensor clean
Adjust the display video controls. Refer to Chapter 4 for more information.
Do not install the display in a place where ventilation may be hindered. Always
maintain adequate ventilation to protect the display from overheating and to ensure
reliable and continued operation.
It is important to avoid using any caustic chemicals on the touch sensor. Do not use
any vinegar-based solutions.
Apply the cleaner with a soft, lint-free cloth. Avoid using gritty cloths.
Always dampen the cloth and then clean the sensor. Be sure to spray the cleaning
liquid onto the cloth, not the sensor, so that drips do not seep inside the display or
stain the bezel.
Always handle the touch sensor with care. Do not pull on or stress cables.
3M Touch Systems Proprietary Information
21