CPE-750P CUI Inc, CPE-750P Datasheet - Page 2

• Manufacturer Part Number: CPE-750P
• Description: BUZZER PIEZO 12VDC 3.6KHZ PANEL
• Manufacturer: CUI Inc
• Series: CPEr
• Type: Piezo Indicator, Internal Driver

Specifications of CPE-750P

• Frequency: 3.6kHz
• Voltage - Rated: 12VDC
• Current Rating: 7mA
• Size / Dimension: Circular - 37.8mm Dia x 23.5mm H
• Mounting Type: Panel Mount
• Sound Pressure Level: 80dB
• Operating Mode: Continuous/Fast Pulse
• Voltage Range: 4 ~ 28VDC
• Termination: Solder Pins/Posts
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Capacitance @ Frequency: -
• Other names: 102-1660

PART NUMBER: CPE-750P
MECHANICAL CHARACTERISTICS
item
solderability
soldering heat resistance
terminal mechanical strength
vibration
drop test
MEASUREMENT METHOD
S.P.L. Measuring Circuit
Mic: RION S.P.L. meter UC30 or equivalent
S.G.: Hewlett Packard 33120A function generator or equivalent
20050 SW 112
th
Ave. Tualatin, Oregon 97062
test condition
Lead terminals are immersed in rosin for
5 seconds and then immersed in solder bath
of 270 ±5°C for 3 ±1 seconds.
Lead terminals are immersed up to 1.5mm from
buzzer’s body in solder bath of 300 ±5°C for
3 ±0.5 seconds or 260 ±5°C for 10 ±1 seconds.
For 10 seconds, the force of 9.8N (1.0kg) is
applied to each terminal in axial direction.
The buzzer shall be measured after applying
a vibration amplitude of 1.5 mm with 10 to
55 Hz band of vibration frequency to each of
the 3 perpendicular directions for 2 hours.
The part will be dropped from a height of
75 cm onto a 40 mm thick wooden board 3
times in 3 axes (X, Y, Z) for a total of 9 drops.
phone
phone [phone] fax
DESCRIPTION: panel mount piezo indicators
fax [phone]
evaluation standard
No damage or cutting off.
90% min. of the lead terminals
will be wet with solder
(except the edge of the terminal).
No interference in operation.
The value of oscillation
frequency/current consumption
should be ±10% of the initial
measurements. The SPL should
be within ±10dB compared with
the initial measurement.
page
date
11/12/2007
2 of 5