MCP2120-I/SL Microchip Technology, MCP2120-I/SL Datasheet - Page 35

• Manufacturer Part Number: MCP2120-I/SL
• Description: IC ENCODR/DECODR 2.5V IR 14-SOIC
• Manufacturer: Microchip Technology
• Type: Infrared Encoder/Decoderr

Specifications of MCP2120-I/SL

• Package / Case: 14-SOIC (3.9mm Width), 14-SOL
• Voltage - Supply, Analog: 2.5 V ~ 5.5 V
• Voltage - Supply, Digital: 2.5 V ~ 5.5 V
• Mounting Type: Surface Mount
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Ic Function: Infrared Encoder/Decoder
• Supply Voltage Range: 2.5V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: SOIC
• No. Of Pins: 14
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCP212XDM - BOARD DEVELOPMENT IRDA
• Applications: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TABLE 2-7:
© 2009 Microchip Technology Inc.
Step Action
10
12
11
1
2
3
4
5
6
7
8
9
Place the two MCP2120/22 Developer’s Boards on a flat
surface about 25 cm (10 inches) apart, and with the IR
ports facing each other.
On the MCP2120/22 Developer’s Board #1:
Ensure that the jumpers are configured as in
Figure 2-2
On the MCP2120/22 Developer’s Board #2:
Ensure that the jumpers are configured as in
Figure 2-8
On the MCP2120/22 Developer’s Boards:
Apply power to each unit via the USB connector.
Connect the PC’s Serial Ports to the DB-9 connector of
each MCP2120/22 Developer’s Board.
On the PC:
Open an instance of HyperTerminal program window
attached to the PC’s Serial Port (such as COM 1) to
connect to the MCP2120/22 Developer’s Board.
Ensure that the window indicates that the HyperTerminal
program is connected and properly configured.
On the PC:
Open a second instance of HyperTerminal program
window attached to the PC’s Serial Port (such as
COM 2) to connect to the MCP2120/22 Developer’s
Board.
Ensure that the window indicates that the HyperTerminal
program is connected and properly configured.
On the PC:
In one of the HyperTerminal program windows (COM 1),
type some characters.
On the PC:
In the other HyperTerminal program windows (COM 2),
type some characters.
On the PC:
In either HyperTerminal program windows, select the
Transfer pull-down menu and then the Send Text File ...
option. Navigate to the folder that contains the
Transmit File.Txt file and select it. Then click
Open.
On the PC:
Make this file transfer transmitting from the other
HyperTerminal program window.
Continue steps 8, 9, 10, or 11 for as long as desired.
Note:
Note:
DEMO #4 STEPS - PASS THROUGH
See D.1 “Configuring the Hyperterminal®
Program”
See
Program”
.
.
D.1 “Configuring the Hyperterminal®
Installation and Operation
Result
—
—
—
On the MCP2120/22 Developer’s Boards:
The green power LED (D1) will turn on.
—
On the MCP2120/22 Developer’s Board:
—
On the PC:
The HyperTerminal window will indicate
“connected” and the selected Baud rate settings.
On the MCP2120/22 Developer’s Board:
—
On the PC:
The HyperTerminal window will indicate
“connected” and the selected Baud rate settings.
On the PC:
In the other HyperTerminal program windows
(COM 2), those characters appear.
On the PC:
In the other HyperTerminal program windows
(COM 1), those characters appear.
On the PC:
In the selected HyperTerminal program window, the
displayed data is transmitted and is received and
displayed by the other HyperTerminal program
window.
On the PC:
In the selected HyperTerminal program window, the
displayed data is transmitted, being received and
displayed by the other HyperTerminal program
window.
—
DS51842A-page 31