3F88L-CG001N Omron, 3F88L-CG001N Datasheet - Page 187
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
3F88L-CG001N
Manufacturer Part Number
3F88L-CG001N
Description
CABLE CAM OUTPUT-I/O BLOCK 1M
Manufacturer
Omron
Datasheet
1.3F88L-RL10.pdf
(232 pages)
Specifications of 3F88L-CG001N
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
3F88LCG001N
- Current page: 187 of 232
- Download datasheet (5Mb)
Operation
The cam output position is
different to the one set using the
teaching function.
When the speed increases, the
timing of peripheral device
operation is late.
g
Problem
Backlash compensation has been
enabled after teaching has been
performed.
With backlash compensation
enabled, the load side (driven
side) instead of the Resolver axle
(drive side) has been manually
rotated and teaching performed.
(Backlash compensation will work
in reverse.)
Teaching has been performed
while the Resolver is rotating (less
than 4 r/min).
The advance angle compensation
function is not used.
The advance angle compensation
function is not enabled.
Probable cause
With the backlash compensation
already enabled, perform the
teaching operation again.
Manually rotate the Resolver axle
(drive side) and perform teaching
again.
Perform teaching again with the
Resolver stationary.
Use the trial operation and
adjustment operation functions to
adjust the cam program (ON/OFF
angle data).
Set the advance angle
compensation function (Function
No. b, Parameter No. 3 to 5 and
Function No. H and Parameter
No. 2) and turn OFF the power
and turn it ON again.
Enable the advance angle
compensation function (Function
No. H, Parameter No. 2) and turn
OFF the power and turn it ON
again.
Possible solution
Chapter 5
5-11