XW2Z-100J-A5 Omron, XW2Z-100J-A5 Datasheet - Page 186
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
XW2Z-100J-A5
Manufacturer Part Number
XW2Z-100J-A5
Description
SERVO RELAY UNIT CABLES 1M
Manufacturer
Omron
Datasheet
1.R88A-TK01W.pdf
(252 pages)
Specifications of XW2Z-100J-A5
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
XW2Z100JA5
- Current page: 186 of 252
- Download datasheet (4Mb)
4-2
4-2-1 Switch Nomenclature and Functions
■
■
Note If the gain adjustment rotary switch is set to 0, the Servomotor will operate according to the
■
Note Turn the power supply OFF before using switches 2 to 6.
4-4
Operation
AUTO TUNING ON
(RS-422/485)
GAIN
Unit No. Rotary Switch: UNIT No. (RS-422/485)
Gain Adjustment Rotary Switch: GAIN
Function Switches
UNIT No.
PLS/SIGN
(1P)
Servo Driver’s internal parameter.
500P/R
PRMTR
DB ON
With SMARTSTEP A-series Servo Drivers, operation settings can be performed simply
by using the front panel switches. Set the switches appropriately according to the
system configuration.
×10
Switch Settings
4
4
The gain adjustment rotary switch adjusts the response of the Servomotor. To
reduce (slow down) the Servomotor’s response, set the gain adjustment rotary
switch to a low value. To increase (speed up) the Servomotor’s response, set the
gain adjustment rotary switch to a high value.
SW
CW/CCW
DB OFF
OFF
1000P/R
×1
Use this switch to set the communications unit number for CN1 and CN3.
When performing multiple-axis communications with multiple Servo Drivers
from CN1 using, for example, a personal computer, set the rotary switch to a
setting other than 0 (i.e., between 1 and F). Be sure not to use the same unit
number more than once when performing multiple-axis communications.
Attempting communications with duplicated unit numbers may result in dam-
age to communications connectors.
(2P)
The function switches set Servo Driver functions.
Switch 6: Switches between switch and parameter settings.
Switches 5 and 4: Set the resolution.
Switch 3: Sets the command pulse input.
Switch 2: Sets the dynamic brake.
Switch 1: Switch to online autotuning.
Unit No. rotary switch. (Default setting: 0.)
Gain adjustment rotary switch. (Default setting: 4.)
Function setting switch. (Default setting: all OFF.)
Chapter 4