R88M-WP75030T-S1 Omron, R88M-WP75030T-S1 Datasheet - Page 346
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
R88M-WP75030T-S1
Manufacturer Part Number
R88M-WP75030T-S1
Description
SERVO MOTOR 750W 200V
Manufacturer
Omron
Datasheet
1.R88A-PR02W.pdf
(458 pages)
Specifications of R88M-WP75030T-S1
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
R88MWP75030TS1
- Current page: 346 of 458
- Download datasheet (5Mb)
Operation
4-8
4-8-1
H Functions
• The bias function shortens positioning time by adding bias revolutions to speed commands (i.e., com-
• If the residual pulses in the deviation counter exceed the setting in Pn108 (bias addition band), the
H Parameters Requiring Settings
Note 1. When not using the bias function, set Pn107 to 0.
Note 2. If the bias rotational speed is set too high, it will cause Servomotor operation to be unstable.
H Setting Procedure
• Complete the gain adjustment before adjusting the bias.
• Increase the Pn107 (bias rotational speed) setting until positioning time is minimal. At this point, if
• If the overshoot is too large, increase Pn108 (bias addition band) to reduce it.
H Operation
Note Refer to Position Loop Block Diagram in 4-7-2 Manual Tuning for the internal processing block
4-108
Pn107
Pn108
mands to the speed control loop).
speed set in Pn107 (bias rotational speed) is added to the speed command, and when the residual
pulses in the deviation counter are within the setting in Pn108, adding to the number of bias rotations
stops.
there are no problems with using overshoot, adjustments are complete.
Parameter No.
configuration.
Advanced Adjustment Functions
The optimum setting depends on the load, the gain, and the bias addition band, so adjust the
setting while observing the Servomotor response. (Begin with a bias setting of Pn107 = 0, and
gradually increase it.)
Bias Function (Position)
Servomotor speed
Bias rotational
speed
Bias addition
band
Parameter
name
Set the rotation speed to be added to the bias
(setting range: 0 to 450 (r/min.)).
Set the residual pulses to be added to the number
of bias rotations using command units (setting
range: 0 to 250 (command units)).
Pn107 added to speed command
when residual pulse exceeds Pn108.
Speed command (command
pulse frequency)
Explanation
Bias function OFF
Bias function ON
4-4-4 Parameter
Details
Chapter 4
Reference
Related parts for R88M-WP75030T-S1
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![G6S-2G](/images/no-image3.png)
Part Number:
Description:
G6S-2GLow Signal Relay
Manufacturer:
Omron Corporation
Datasheet:
![G3NE-220T](/images/no-image3.png)
Part Number:
Description:
Compact, Low-cost, SSR Switching 5 to 20 A
Manufacturer:
Omron Corporation
Datasheet:
![G6K-2G-Y](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G4A-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G5NB-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6B-2114P-US](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6D-1A-ASI](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G8P-1A4P](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet: