R88M-WP75030H-BW Omron, R88M-WP75030H-BW Datasheet - Page 324
![no-image](/images/manufacturer_photos/0/4/494/omron_sml.jpg)
R88M-WP75030H-BW
Manufacturer Part Number
R88M-WP75030H-BW
Description
SERVO MOTOR 750W 200V W/BRAKE
Manufacturer
Omron
Datasheet
1.R88A-PR02W.pdf
(458 pages)
Specifications of R88M-WP75030H-BW
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
R88MWP75030HBW
- Current page: 324 of 458
- Download datasheet (5Mb)
Operation
Note 1. When a command to travel in a prohibited direction within the drive prohibit area is input, the
Note 2. With position control, the feedback pulses and command pulses continue to be counted with-
4-5-7
H Function
• With this function, any number of pulses can be set for encoder signals output from the Servo Driver.
• The number of pulses per Servomotor revolution can be set within a range of 16 to (number of encoder
• Use this function for the following applications:
H Parameters Requiring Setting
Note 1. The default setting is 1,000 (pulses/rotation), and the setting range is 16 to 16,384 (pulses/
Note 2. These parameters are enabled when the power is turned ON again after having been turned
Note 3. If a value greater than the encoder resolution is set, operation will proceed according to the
H Operation
• Incremental pulses are output from the Servo Driver through a frequency divider.
4-86
Pn201
resolution pulses). The upper limit is 16,384 pulses/rotation.
When using a controller with a low response frequency.
When it is desirable to set a pulse rate that is easily divisible.
(For example, in a mechanical system in which a single Servomotor revolution corresponds to a travel
of 10 mm, if the resolution is 5
Parameter No.
Servomotor is stopped using the method set in Pn001.1. If a command to travel in the oppo-
site direction is input, the Servomotor automatically resumes operation.
out the deviation counter’s residual pulses being reset. If the drive prohibit input turns ON in
this state (i.e., drive permitted), the position will be shifted by the amount of the residual
pulses.
rotation).
OFF. (Check to see that the LED display has gone OFF.)
formula: (dividing rate setting) = (encoder resolution)
Encoder Dividing Function (All Operating Modes)
Encoder
Encoder dividing rate
setting
Driver
Parameter name
μ
m/pulse, set the encoder dividing rate to 2,000 (pulses/revolution).
Processing
circuitry
Set the number of encoder
pulses to be output. (See
notes 1, 2, and 3).
Frequency
divider
Explanation
4-4-4 Parameter
Details
Phase A
Phase B
Phase Z
Reference
Chapter 4
Related parts for R88M-WP75030H-BW
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![G6S-2G](/images/no-image3.png)
Part Number:
Description:
G6S-2GLow Signal Relay
Manufacturer:
Omron Corporation
Datasheet:
![G3NE-220T](/images/no-image3.png)
Part Number:
Description:
Compact, Low-cost, SSR Switching 5 to 20 A
Manufacturer:
Omron Corporation
Datasheet:
![G6K-2G-Y](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G4A-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G5NB-1A-E](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6B-2114P-US](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G6D-1A-ASI](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet:
![G8P-1A4P](/images/no-image3.png)
Part Number:
Description:
Manufacturer:
Omron Corporation
Datasheet: