27-21/BHC-AP1Q2/3C Everlight Electronics Co Ltd, 27-21/BHC-AP1Q2/3C Datasheet - Page 9

• Manufacturer Part Number: 27-21/BHC-AP1Q2/3C
• Description: LED 0.6MM INGAN BLUE CLR RA SMD
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 27-21/BHC-AP1Q2/3C

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

Precautions For Use
1. Over-current-proof
2. Storage
3. Soldering Condition
3.2 Reflow soldering should not be done more than two times.
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
Everlight Electronics Co., Ltd.
Device No:DSE-000
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
3.1 Pb-free solder temperature profile
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
http://www.everlight.com
Prepared date: 30-Jun-2011
Prepared by:Haizheng Gao
Rev 1
27-21/BHC-AP1Q2/3C
Page: 9 of 10