25-21SYGC/S530-E2/TR8 Everlight Electronics Co Ltd, 25-21SYGC/S530-E2/TR8 Datasheet - Page 9

• Manufacturer Part Number: 25-21SYGC/S530-E2/TR8
• Description: LED SUPER YLW/GRN CLEAR REV SMD
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 25-21SYGC/S530-E2/TR8

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

4.Soldering Iron
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
5.Repairing
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Everlight Electronics Co., Ltd.
Device No:SZDSE-251-001
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Repair should not be done after the LEDs have been soldered. When repairing is
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3
Tucheng, Taipei 236, Taiwan, R.O.C
EVERLIGHT ELECTRONICS CO.,LTD.
http://www.everlight.com
Prepared date:19-Aug-2005
Tel: [phone]
Fax: [phone]
http://www.everlight.com
25-21SYGC/S530-XX/TR8
Rev.1
Prepared by:Wang Zhiyong
Page: 9 of 9