67-21/B7C-AS2U1N/2T Everlight Electronics Co Ltd, 67-21/B7C-AS2U1N/2T Datasheet - Page 9

• Manufacturer Part Number: 67-21/B7C-AS2U1N/2T
• Description: LED TOPLED 2PLCC SMD
• Manufacturer: Everlight Electronics Co Ltd

Specifications of 67-21/B7C-AS2U1N/2T

• Lead Free Status / Rohs Status: Vendor undefined / RoHS Compliant

Technical Data Sheet
Top View LEDs
Precautions for Use
1. Over-current-proof
2. Storage
3. Soldering Condition
Everlight Electronics Co., Ltd.
Device No. : DSE-0001045
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30
2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60%
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
1~5 °C / Sec.
RH or less.If unused LEDs remain, it should be stored in moisture proof packages.
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5
1~5 °C / Sec.
180~200°C
120 Sec. Max.
Pre-heating
℃
for 24 hours.
Prepared date: 22-Apr-2008
http://www.everlight.com
60 Sec. Max.
Above 220°C
10 Sec. Max.
260°C. Max.
℃
67-21/B7C-AS2U1N/2T
or less and 90%RH or less.
Rev. 1
Prepared by: Rita Shen
Page: 9 of 10