VHB75W-Q48-S15 CUI Inc, VHB75W-Q48-S15 Datasheet - Page 10

• Manufacturer Part Number: VHB75W-Q48-S15
• Description: CONVERTER DC/DC 75W 15V 5A
• Manufacturer: CUI Inc
• Series: V-Infinity VHB75Wr
• Type: With Remote On/Off and UVLOr

Specifications of VHB75W-Q48-S15

• Voltage - Input (min): 18V
• Voltage - Input (max): 75V
• Number Of Outputs: 1
• Power (watts) - Manufacture Series: 75W
• Power (watts) - Max: 75W
• 1st Output: 15 VDC @ 5A
• 2nd Output: -
• 3rd Output: -
• Voltage - Isolation: 1.5kV (1500V)
• Mounting Type: Through Hole
• Package / Case: 9-DIP Module, 1/2 Brick
• Size / Dimension: 2.40" L x 2.28" W x 0.50" H (61mm x 57.9mm x 12.7mm)
• Operating Temperature: -40°C ~ 100°C
• Efficiency: 85%
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 102-2255; VHB75W-Q48-S15

PART NUMBER: VHB75W
16. OUTPUT FILTERING
The converter has built-in capacitors at the output to control ripple and noise. If desired, additional output capacitance can be
introduced at the input to the powered equipment. Recommended starting point: one 10μF tantalum and one 1μF ceramic capacitor in
parallel at the output.
17. OUTPUT NOISE MEASUREMENT SCHEMATIC
For proper output ripple and noise measurement, connect a 10μF tantalum and a 1μF ceramic capacitor across the output. Set the
scope bandwidth to 20MHz. Probe directly off of one of the capacitors, using a small ground clip to minimize measurement error.
20050 SW 112
th
Ave. Tualatin, Oregon 97062
+Vin
-Vin
FIGURE 11. OUTPUT NOISE MEASUREMENT CIRCUIT
Trim
+Vo
-Vo
+S
-S
phone
phone [phone] fax
Ceramic
1.0µF
DESCRIPTION: half-brick dc-dc converter
Solid Tantalum
10µF
fax [phone]
+
To Scope
www.v-infinity.com
page
date
Resistor
Load
04/2011
10 of 10