VHB75W-Q24-S48 CUI Inc, VHB75W-Q24-S48 Datasheet - Page 7

• Manufacturer Part Number: VHB75W-Q24-S48
• Description: CONVERTER DC/DC 75W 48V 1.56A
• Manufacturer: CUI Inc
• Series: V-Infinity VHB75Wr
• Type: With Remote On/Off and UVLOr

Specifications of VHB75W-Q24-S48

• Voltage - Input (min): 9V
• Voltage - Input (max): 36V
• Number Of Outputs: 1
• Power (watts) - Manufacture Series: 75W
• Power (watts) - Max: 75W
• 1st Output: 48 VDC @ 1.56A
• 2nd Output: -
• 3rd Output: -
• Voltage - Isolation: 1.5kV (1500V)
• Mounting Type: Through Hole
• Package / Case: 9-DIP Module, 1/2 Brick
• Size / Dimension: 2.40" L x 2.28" W x 0.50" H (61mm x 57.9mm x 12.7mm)
• Operating Temperature: -40°C ~ 100°C
• Efficiency: 82%
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 102-2245

PART NUMBER: VHB75W
8. OUTPUT OCP AND SHORT-CIRCUIT PROTECTION
Output overload and short circuit conditional will cause the output voltage to decline or shutdown altogether.
is not over 100°C, the output recovers automatically when the short or OCP conditions are removed. In the case of slight overloading,
the output voltage may not shut down, but the converter may build up heat over time, causing over-temperature shutdown.
9. OVER-TEMPERATURE PROTECTION
When the case temperature reaches about 100°C, the converter's built-in protection circuit will shut down the output. When the tem-
perature is reduced enough to a safe operating level, the converter will recover to normal operations automatically.
10. OUTPUT OVP
In case the output voltage exceeds the OVP threshold, the converter shuts down.
11. OUTPUT PARALLEL CONNECTIONS
The converter is not designed for load share on the output. One may be inclined to use this circuit to force current sharing by trim-
ming the output voltages for each converter. However, this circuit may not reliably or accurately divide the load current, as the device
characteristics of the converters or the diodes may not be balanced over a range of operating conditions. We generally do not recom-
mend this circuit to increase power output over a single converter. Instead, we recommend this setup for redundancy only, having
one converter as a backup in case of a failure. Make sure the OR-ing diodes can handle the voltage and full load current.
20050 SW 112
FIGURE 6. OUTPUT
PARALLEL CONNECTIONS
th
Ave. Tualatin, Oregon 97062
phone
phone [phone] fax
+Vin
-Vin
+Vin
-Vin
DESCRIPTION: half-brick dc-dc converter
+Vo
+Vo
-Vo
-Vo
fax [phone]
www.v-infinity.com
If the case temperature
page
date
04/2011
7 of 10