PTC-04-DB-CALIB Melexis Inc, PTC-04-DB-CALIB Datasheet - Page 10

• Manufacturer Part Number: PTC-04-DB-CALIB
• Description: DUAGHTER BOARD CALIBRATION
• Manufacturer: Melexis Inc
• Series: -r

Specifications of PTC-04-DB-CALIB

• Accessory Type: Calibration Software
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: PTC Programmer

2. The program notifies you that the current calibration is within tolerance! No Correction of the
3. At the end of the calibration, the software verifies if the programmer was at temperature when the
It is advised not to calibrate (store the new calibration parameters in the programmer) when the
programmer is not at operating temperature. This is important for the accuracy of the PTC04 programmer.
User manual calibration software PTC04
UI_0PTC04AAMLX Rev. 1.35
calibration parameters (Calibration) is needed.
If no calibration is needed you can still choose to calibrate or not.
•
•
calibration started. If the programmer was not at temperature, the following message is given.
•
•
If you press yes, the new calibration parameters are written into the PTC04.
If you press no, there are no modifications done.
If you press yes, the new calibration parameters are written into the PTC04.
If you press no, there are no modifications done.
Figure 16: Programmer is not at temperature.
Calibration Software PTC04
Figure 15: Calibrate Anyway?
Page 10 of 17
User Manual
February 10