LCMXO2-1200ZE-P-EVN Lattice, LCMXO2-1200ZE-P-EVN Datasheet - Page 3

• Manufacturer Part Number: LCMXO2-1200ZE-P-EVN
• Description: KIT DEVELOPMENT MACHX02 PICO
• Manufacturer: Lattice
• Series: MachXO2r
• Type: PLDr

Specifications of LCMXO2-1200ZE-P-EVN

• Contents: Board, Cable, Documentation
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: LCMXO2-1200ZE-MG132CR1
• Other names: 220-1168

The following instructions describe the
Windows HyperTerminal program which
is found on most Windows PCs. You may
use another terminal program but setup
will be different. Note that Windows 7 does
not include HyperTerminal. Tera Term has
been verified to work with Windows 7. For
Linux, Minicom is a good alternative.
Note: This step uses the procedure for Windows
XP users. Steps may vary slightly if using
another Windows version.
1. From the Start menu, select Control
2. Select the Hardware tab and click Device Manager. The “Device Manager” dialog appears.
3. Expand the Ports (COM & LPT) entry and note the COM port number for the USB Serial
4. From the Start menu, select Programs > Accessories > Communications > HyperTermi-
5. Specify a Name and Icon for the new connection. Click OK. The “Connect To” dialog ap-
6. Select the COM port identified in Step 3 from the Connect using: list. Click OK.
7. The “COMn Properties” dialog appears where n is the COM port selected from the list.
8. Select the following Port Settings and click OK:
Set Up a Terminal Program
You will use a terminal program to
communicate with the evaluation board.
Panel > System. The “System Properties” dialog appears.
Port.
nal. The HyperTerminal application and a “Connection Description” dialog appear.
pears.
The HyperTerminal window appears.
Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Development Kit
MachXO2 Pico