X4K-Z1U-00011-A1 Digi International, X4K-Z1U-00011-A1 Datasheet - Page 8

• Manufacturer Part Number: X4K-Z1U-00011-A1
• Description: IDIGI GATEWAY DEV KIT ZIGBEE
• Manufacturer: Digi International
• Series: IDigi®r
• Type: Transceiver, Z-Waver

Specifications of X4K-Z1U-00011-A1

• Frequency: 2.4GHz
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: ConnectPort® X4
• Other names: 602-1209

Step 2: Connect the ConnectPort X4
iDigi Gateway Development Kit Getting Started Guide
To begin setting up your iDigi Gateway Development Kit you will need to connect and power on
the ConnectPort X4, and form your XBee network. To do so, follow these steps:
Note: If you have additional XBee/ZigBee devices, for the best kit experience, we recommend
that you power down or disable joining on other XBee/ZigBee PANs in the area before beginning
this step. If you are unable to do this other devices might join the kit network and create
interference when deploying your iDigi Dia project. You could also encounter issues connecting
the XBee Sensor and XBee Smart Plug to the ConnectPort X4 as they are configured to join any
available PAN.
1. Remove the ConnectPort X4 from the box and attach the XBee antenna to the
2. Connect one end of the Ethernet cable to the ConnectPortX4, and the other end to your
WARNING: If the ConnectPort X4 does not have access to the Internet this kit cannot be
completed.
ConnectPort X4.
Ethernet switch (as shown below).
Figure 2: Ethernet Switch
®
to your Local Network
8