PD15-21B/TR8 Everlight Electronics Co Ltd, PD15-21B/TR8 Datasheet - Page 7

• Manufacturer Part Number: PD15-21B/TR8
• Description: PHOTODIODE PIN IR BLACK 1206
• Manufacturer: Everlight Electronics Co Ltd

Specifications of PD15-21B/TR8

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1080-1365-2

3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is often
started at the time of the hand solder.
5.Repairing
unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed
beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Everlight Electronics Co., Ltd.
Device No
Repair should not be done after the LEDs have been soldered. When repairing is
Each terminal is to go to the tip of soldering iron temperature less than 280 ℃ for 3
：
D TD-152-139
http://www.everlight.com
Prepared date
：
0 2-15-2008
Rev 2
Prepared by
PD15-21B/TR8
：
J aine tsai
Page: 7 of 10