EE-SPZ301-A Omron, EE-SPZ301-A Datasheet - Page 3

• Manufacturer Part Number: EE-SPZ301-A
• Description: SENSOR OPTO REFL 200MM THRU PCB
• Manufacturer: Omron
• Series: -r

Specifications of EE-SPZ301-A

• Sensing Distance: 7.874" (200mm)
• Sensing Method: Retroreflective
• Sensing Object: Mirror
• Output Configuration: NPN - Open Collector/Dark-ON
• Sensing Light: Infrared
• Mounting Type: Through Hole
• Current - Supply: 15mA
• Voltage - Supply: 5 V ~ 24 V
• Package / Case: PCB Mount
• Features: Supports Connection With PLCs
• Lead Free Status / Rohs Status: Contains lead / RoHS compliant by exemption
• Other names: EE-SPZ301A; EESPZ301A; OR538

I/O Circuits
NPN Output
Safety Precautions
Refer to Warranty and Limitations of Liability.
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purposes.
Make sure that this product is used within the rated ambient
environment conditions.
● Wiring
• Connection is made using a connector. Do not solder to the pins
• When extending the cable, use an extension cable with conductors
• To use a cable length longer than 2 m, attach a capacitor with a
• Make sure the total length of the power cable connected to the
(leads).
having a total cross-section area of 0.3 mm
must be 2 m maximum.
capacitance of approximately 10 µF to the wires as shown below.
The distance between the terminal and the capacitor must be within
2 m. (Use a capacitor with a dielectric strength that is at least twice
the Sensor's power supply voltage.)
product is less than 10 m even if a capacitor is inserted.
EE-SPZ401-A
EE-SPZ301-A
Model
Precautions for Correct Use
OUT
Output configuration
2 m max.
Light-ON
A capacitor of
10 µF min.
Dark-ON
WARNING
5 to 24 VDC
0 V
+
−
2
. The total cable length
Extension cable
Light indicator
(red)
Output
transistor
Load 1
(relay)
Load 2
Light indicator
(red)
Output
transistor
Load 1
(relay)
Load 2
Timing charts
Interrupted
Interrupted
Releases
Operates
Operates
Releases
Incident
Incident
OFF
OFF
OFF
OFF
ON
ON
ON
ON
H
L
H
L
∗ Voltage output (when the sensor is connected to a transistor circuit)
Light indicator
(red)
Main
circuit
1.5 to 3 mA
Output circuit
OUT
Ic
Load 2
Load 1
EE-SPZ-A
∗
5 to 24 VDC
3