MICRF008BM TR Micrel Inc, MICRF008BM TR Datasheet - Page 4

• Manufacturer Part Number: MICRF008BM TR
• Manufacturer: Micrel Inc

Specifications of MICRF008BM TR

• Operating Band Frequency: 300 to 440MHz
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 3.94mm
• Product Height (mm): 1.48mm
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / Rohs Status: Not Compliant

Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. Devices are ESD sensitive, use appropriate ESD precautions. Meets class 1 ESD test requirements, (human body model HBM), in accordance with
4. Specification for packaged product only.
5. Sensitivity is defined as the average signal level measured at the input necessary to achieve 10
6. Sensitivity, a commonly specified receiver parameter, provides an indication of the receiver’s input referred noise, generally input thermal noise.
7. Parameter scales linearly proportional with reference oscillator frequency f
8. Spurious reverse isolation represents the spurious components which appear on the RF input pin (ANT) measured into 50Ω with an input RF
9. Series resistance of the resonator (ceramic resonator or crystal) should be minimized to the extent possible. In cases where the resonator series
10. Parameter scales linearly proportional with reference oscillator frequency f
Micrel, Inc.
August 2008
MIL-STD-883C, method 3015. Do not operate or store near strong electrostatic fields.
a return-to-zero (RZ) waveform with 50% average duty cycle at a data rate of 1kbps (Manchester encoded). The RF input is assumed to be matched
into 50Ω.
However, it is possible for a more sensitive receiver to exhibit range performance no better than that of a less sensitive receiver if the background
noise is appreciably higher than the thermal noise. Background noise refers to other interfering signals, such as FM radio stations, pagers, etc.
A better indicator of achievable receiver range performance is usually given by its selectivity, often stated as intermediate frequency (IF) or radio
frequency (RF) bandwidth, depending on receiver topology. Selectivity is a measure of the rejection by the receiver of ambient noise. More selective
receivers will almost invariably provide better range. Only when the receiver selectivity is so high that most of the noise on the receiver input is
actually thermal will the receiver demonstrate sensitivity-limited performance.
new parameter value as the ratio:
matching network
resistance is too great, the oscillator may oscillate at a diminished peak-to-peak level, or may fail to oscillate entirely. Micrel recommends that series
resistances for ceramic resonators and crystals not exceed 50Ω and 100Ω respectively.
new parameter value as the ratio:
f
f
REFOSC
REFOSC
3.36MHz
3.36MHz
MHz
MHz
×
×
(parameter
(parameter
value
value
at
at
3.36MHz)
3.36MHz)
T
T
4
. For any reference oscillator frequency other than 3.36MHz, compute
. For any reference oscillator frequency other than 3.36MHz, compute
–
2
BER (bit error rate). The input signal is defined as
M9999-080108
MICRF008