STAC9200X5NAEB1XR Integrated Device Technology (Idt), STAC9200X5NAEB1XR Datasheet - Page 20

• Manufacturer Part Number: STAC9200X5NAEB1XR
• Description: Audio Codec 2ADC / 2DAC 24-Bit 32-Pin VFQFPN EP T/R
• Manufacturer: Integrated Device Technology (Idt)
• Type: General Purposer

Specifications of STAC9200X5NAEB1XR

• Package: 32VFQFPN EP
• Adc/dac Resolution: 24 Bit
• Number Of Channels: 2ADC /2 DAC
• Sampling Rate: 192 KSPS
• Number Of Dacs: 2
• Operating Supply Voltage: 3.3 V

3. EXTENDED FEATURE EXPLANATION
IDT™
STAC9200
2-CHANNEL HIGH DEFINITION AUDIO CODEC
3.1.
3.2.
3.3.
3.4.
2-CHANNEL HIGH DEFINITION AUDIO CODEC
SPDIF Input
SPDIF Output
Universal Jacks
Audio Jack Presence Detect
SPDIF IN can run at 44.1 KHz, 48 KHz and 96 KHz, and has internal Jack Sensing.
A sophisticated digital PLL allows automatic rate detection and accurate data recovery. The ability to
directly accept consumer SPDIF voltage levels eliminates the need for costly external receiver ICs.
Advanced features such as record slot select and SPDIF_IN routing to the DAC allows for simulta-
neous record and play.
SPDIF Output can run at 44.1 KHz, 48 KHz, and 96 KHz at bit rates up to 24 bits, as defined in the
Intel High Definition Audio Specification. This insures compatibility with all consumer audio gear and
allows for convenient integration into home theater systems and multi-media centers.
IDT’s Universal Jacks
tation.
For the STAC9200 the Universal Jacks
•
•
1
loads on both sets of pins at the same time.
Sense_A pin is used to detect the presence of plugs in ports A, B, C, and D. Refer to the reference
design for port detect circuitry. Select the precision of the resistors used as follows:
Includes pull-up resistors on Sense A and series resistors between jack switch and Sense A.
Headphone capabilities are available on pins 39/41 and 35/36, but one should not put headphone
Note: On the STAC9200 only one function can be selected at a time, you cannot have an input
and output at the same time on the same set of pins. This function can be changed at any time.
All of the STAC9200 ports support:
• Line Out
• Line In
• Mic with 0/10/20/30/40 dB Mic Boost
Ports A and D also support
• Headphone Out
AVDD Nominal Voltage
TM
(+- 5%)
4.5V
3.3V
5V
4V
TM
1
technology allows for the greatest flexibility in board design and implemen-
IDT CONFIDENTIAL
20
TM
Resistor Tolerance
(If Port D is used)
capabilities are as follows
0.50%
0.10%
1%
1%
STAC9200
(If Port D is not used)
Resistor Tolerance
1%
1%
1%
1%
PC AUDIO
V 1.6 01/08