1376389-1 TE Connectivity, 1376389-1 Datasheet - Page 10

• Manufacturer Part Number: 1376389-1
• Description: 5MM POWER KEY 3P PLUG HSG NUT
• Manufacturer: TE Connectivity

Specifications of 1376389-1

• Product Line: 5.0 Power Key Connectors
• Product Type: Connector
• Connector Type: Housing
• Wire/cable Type: Discrete Wire
• Termination Method To Wire/cable: Crimp
• Sealed: No
• Shape: Rectangular
• Ul File Number: E28476
• Csa File Number: LR7189
• Mating Retention Type: Latching
• Contact - Rated Current (a): 9
• Hot Pluggable: No
• Operating Voltage Reference: AC
• Operating Voltage (vac): 300
• Wire/cable Size (awg): 16 – 24
• Wire/cable Size (mm²): 0.22 – 1.25
• Wire/cable Size (cma): 434.18 – 2,466.91
• Profile Height (y-axis) (mm [in]): 9.60 [0.378]
• Number Of Positions: 3
• Number Of Rows: 1
• Mating Retention: With
• Selectively Loaded: No
• Centerline (mm [in]): 5.00 [0.197]
• Length (x-axis) (mm [in]): 20.00 [0.787]
• Width (z-axis) (mm [in]): 16.20 [0.638]
• Contact Type: Socket
• Connector Style: Plug
• Housing Color: Natural
• Mating Alignment: With
• Mating Alignment Type: Keyed
• Housing Material: Nylon 6/6 GF
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Ul Rating: Recognized
• Ul Voltage Rating (vac): 300
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 1.70 – 3.10 [0.067 – 0.122]
• Application Use: Wire-to-Board
• Contact Transmits (typical Application): Signal (Data)/ Power
• Packaging Method: Bag

10 of 19
Requirements
Requirements
Procedures
Procedures
Test Items
Test Items
試験項目
試験方法
試験項目
試験方法
規格値
規格値
項番
項番
No.
No.
温湿度サイクリング
耐電圧 2.2 kVAC 1 分間 (終期)
絶縁抵抗 500 M
総合抵抗 20 m
嵌合したコネクタを 25～65℃,
80～98 % R. H と－10℃
寒冷衝撃を 10 サイクル実施する。
MIL-STD-202, 試験法 106 条件 D
但し､測定は室内放置 3 時間後行う｡
1サイクル：24時間。
塩水噴霧
20 m
性能に影響する様な腐食なきこと｡
嵌合したコネクタを 5±1%の塩水噴霧に
48 時間さらすこと｡
MIL-STD-202, 試験法 101 条件 B
EIA 364-26
測定は塩の堆積物を水洗した後､常温で
自然乾燥後行う｡
以下 (終期)
(リーク電流 5 mA 以下)
環 境 的 性 能 Environmental Requirements
以下 (終期)
以上 (終期)
Fig. 3 (続く) (To be Continued)
5mm パワー キイ コネクタ
5mm Power Key Connector
3.5.17
3.5.18
Humidity-Temperature Cycling
Dielectric withstanding voltage 2.2 kV
AC 1 minute.
Insulation resistance (final) 500 M Min.
Termination resistance 20 m Max. (Final)
Mated connector, 25～65℃,
80～98 % R. H. 10 cycles
Cold shock －10℃(not ) performed
MIL-STD-202, Method 106 Condition D
The measurement is held after being left
indoor
for 3 hours. 1cycle=24hours
Salt Spray
20 m Max. (Final)
No corrosion influence performance
Subject mated connectors to 5±1% salt
concentration for 48 hours.
MIL-STD-202, Method 101 Condition B
EIA 364-26
The measurement is held after remove the
salt
and dry up at indoor.
108-5699
Rev. E