FT2232HL - TRAY FTDI, Future Technology Devices International Ltd, FT2232HL - TRAY Datasheet - Page 11

• Manufacturer Part Number: FT2232HL - TRAY
• Description: IC USB UART/FIFO DUAL HS 64LQFP
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Series: USBmadeEZ-FIFOr

Specifications of FT2232HL - TRAY

• Features: USB to UART and/or FIFO, SPI, I2C, JTAG
• Number Of Channels: 2, DUART
• Fifo's: 4096 Byte
• Protocol: RS-232, RS-422, RS-485
• Voltage - Supply: 3 V ~ 3.6 V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FT2232HL - TRAY

3.4 Configured Pins
The following sections describe the function of the configurable pins referred to in the table given in
Section 3.2 which is determined by how the FT2232H is configured.
3.4.1 FT2232H pins used in an RS232 interface
The FT2232H channel A or channel B can be configured as an RS232 interface. When configured in this
mode, the pins used and the descriptions of the signals are shown in Table 3.4.
Table 3.4 Channel A and Channel B RS232 Configured Pin Descriptions
Channel A
Pin No.
16
17
18
19
21
22
23
24
26
29
30
Channel B
Pin No.
38
39
40
41
43
44
45
46
48
54
55
Copyright © 2010 Future Technology Devices International Limited
RXLED#
TXLED#
TXDEN
Name
DCD#
DTR#
DSR#
RTS#
CTS#
FT2232H DUAL HIGH SPEED USB TO MULTIPURPOSE UART/FIFO IC
RXD
TXD
RI#
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
OUTPUT
INPUT
INPUT
INPUT
INPUT
INPUT
Type
TXD = transmitter output
RXD = receiver input
RTS# = Ready To send handshake output
CTS# = Clear To Send handshake input
DTR# = Data Transmit Ready modem signaling line
DSR# = Data Set Ready modem signaling line
DCD# = Data Carrier Detect modem signaling line
RI# = Ring Indicator Control Input. When the Remote Wake
up option is enabled in the EEPROM, taking RI# low can be
used to resume the PC USB Host controller from suspend.
(Also see note 1, 2, 3 in section 4.12)
TXDEN = (TTL level). For use with RS485 level converters.
RXLED = Receive signaling output. Pulses low when receiving
data (RXD) via USB. This should be connected to an LED.
TXLED = Transmit signaling output. Pulses low when
transmitting data (TXD) via USB. This should be connected to
an LED.
RS232 Configuration Description
Document No.: FT_000061
Clearance No.: FTDI#77
Datasheet Version 2.10
11