2154235-1 TE Connectivity, 2154235-1 Datasheet - Page 2

• Manufacturer Part Number: 2154235-1
• Description: Lighting Connectors LED SKT W/O OPT LTCH 40 VDC 1500MA
• Manufacturer: TE Connectivity
• Type: Wire to Boardr

Specifications of 2154235-1

• Product: Socket Connectors
• Mounting Style: SMD/SMT
• Termination Style: IDC
• Contact Plating: Gold
• Contact Material: Copper Alloy
• Housing Material: Thermoplastic
• Current Rating: 1.5 A
• Voltage Rating: 40 VDC
• Product Type: Socket
• Product Series: LS
• Operating Voltage (vdc): 40
• Current, Maximum (ma): 1500
• Socket Type: LED to Wire
• Optics Latch: Without
• Contact Base Material: Copper Alloy
• Contact Plating, Mating Area, Material: Gold
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Application: Termination for Philips Lumileds LUXEON S LED Application
• Lead Free Status / Rohs Status: Details

3.3.
3.4.
3.5.
Initial examination of product.
Final examination of product.
Low Level Contact Resistance
(LLCR).
Insulation resistance.
Withstanding voltage.
Temperature rise vs current.
Random vibration.
Rev O5
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions.
Test Requirements and Procedures Summary
Test Description
Voltage: 40 volts DC
Current: 1.5 amperes
Temperature: -40 to 105°C
Meets requirements of product
drawing and Application
Specification 114-13294.
Meets visual requirements.
15 milliohms maximum initial.
ΔR 15 milliohms maximum.
One megohm minimum.
One minute hold with no breakdown
or flashover.
30°C maximum temperature rise at
specified current.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional (C of C)
inspection per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
See Figure 3.
EIA-364-21.
500 volts DC, 2 minute hold.
Test between adjacent contacts and
mounting plate of mated specimens.
EIA-364-20, Condition I.
1500 volts AC at sea level.
Test between adjacent contacts and
mounting plate of mated specimens.
EIA-364-70, Method 1.
Stabilize at a single current level
until 3 readings at 5 minute intervals
are within 1°C. 100% of the circuits
energized.
EIA-364-28, Test Condition VII,
Condition Letter D.
Subject mated specimens to 3.10
G's rms between 20 to 500 Hz.
Fifteen minutes in each of 3
mutually perpendicular planes.
See Figure 4.
Procedure
108-2455
2 of 8