194189-9 TE Connectivity, 194189-9 Datasheet - Page 2

• Manufacturer Part Number: 194189-9
• Description: Power to the Board PIN ASSY CRIMP
• Manufacturer: TE Connectivity

Specifications of 194189-9

• Product Type: Contacts
• Contact Gender: Pin (Male)
• Current Rating: 15 A
• Pitch: 3.1 mm
• Termination Style: Crimp
• Contact Plating: Silver
• Contact Material: Copper Alloy
• Housing Material: Stainless Steel
• Retention Spring Material: Stainless Steel
• Continuous Current Amperage (a): 15
• Pin Diameter (mm [in]): 3.00 [0.118]
• Pin Type: Crimp
• Hot Mate: No
• Product Name: AMPOWER
• Pin Material: Copper Alloy
• Used With: 12-14 AWG
• Contact Type: Pin
• Contact Mating Sequence: Third
• Plating Material: Silver
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Lead Free Status / Rohs Status: Details

3.4.
3.5.
Rev B
Examination of product.
Termination resistance.
Insulation resistance.
Dielectric withstanding voltage.
Temperature rise vs current.
Vibration, random.
Mechanical shock, specified pulse.
Durability.
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Meets requirements of product
drawing.
6 milliohms maximum for Type III+
contacts.
0.5 milliohm maximum for 3mm
contacts.
0.2 milliohm maximum for 9mm
contacts.
1000 megohms minimum.
1000 vac at sea level.
1 minute hold with no breakdown or
flashover.
30EC maximum temperature rise at
specified current.
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
Visual, dimensional and functional
per applicable quality inspection
plan.
TE Spec 109-6-6.
Subject samples to 20 mv
maximum open circuit at 100 ma
maximum.
TE Spec 109-28-4.
Test between adjacent contacts.
TE Spec 109-29-1.
Test between adjacent contacts.
TE Spec 109-45-2.
Measure temperature rise vs
current.
See Figure 3.
TE Spec 109-21-7.
Subject mated samples to 3.13 G’s
rms between 5-500 Hz. 15 minutes
in each of 3 mutually perpendicular
planes.
TE Spec 109-26-1, except 30 G’s.
Subject mated samples to 30 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
TE Spec 109-27.
Mate and unmate samples for 25
cycles at a maximum rate of 600
cycles per hour.
Procedure
108-1809
2 of 6