EM91215CK ELAN Microelectronics Corp, EM91215CK Datasheet

no-image

EM91215CK

Manufacturer Part Number
EM91215CK
Description
Tone/pulse switchable dialer with LCD interface
Manufacturer
ELAN Microelectronics Corp
Datasheet
GENERAL DESCRIPTION
FEATURES
ORDERING INFORMATION
Versions list
* This specification are subject to be changed without notice.
VERSION
EM91215A
EM91215B
EM91215C
The EM91215 is a series of tone/pulse switchable dialers that is composed of T/P dialer and T/P dialer with 13
set memories. The EM91215 series provides necessary functions of telephone set for application in any
environment, such as Pulse dialing, Tone (DTMF) dialing, Handfree dialing, keying tone , mute and pulse mute
functions. Beside this, SDO (Serial Data Output) functions is provided in advance version that is designed to
drive LCD driver and voice synthesizer. In this application, the dialing numbers can be displayed on LCD screen
with EM32100 ( or EM32116 ).
• Tone/Pulse switchable.
• Adding resistor on keyboard scan pin that can select many telephone specifications, such as : Pulse rate,
• SDO function supports LCD driver and voice synthesizer to indicate dialing numbers.
• Handfree function provides on-hook dialing and speakerphone application.
• 13 set one touch or (3 set one touch and 10 set two touch) repertory memory, each one can store data up to
• A 32-digit LNB (last number) redial memory.
• A 32-digit SAVE redial memory.
• Keytone function provides rapidly keying recognition.
• Pulse mute function supports pulse dialing application.
• Using 3.579545 MHz crystal or ceramic resonator.
• Package forms: PDIP , skinny.
Wide operating voltage from 2.0 V to 5.5 V.
Low operating current, 0.15 mA (Pulse) and 0.3 mA (Tone) typically.
M/B ratio, Flash time, Pause time, P-T wait time and keyboard type.
16 digits.
LNB
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
KT
SAVE
TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE
HF
SDO(LCD)
PMUTE
EM91215 SERIES
EM91215 SERIES
10.1.1997
1

Related parts for EM91215CK

EM91215CK Summary of contents

Page 1

GENERAL DESCRIPTION The EM91215 is a series of tone/pulse switchable dialers that is composed of T/P dialer and T/P dialer with 13 set memories. The EM91215 series provides necessary functions of telephone set for application in any environment, such as ...

Page 2

... ROW5 is selected by R option (COL5), there are 13 sets one touch memory version in EM91215C provided. FUNCTIONAL BLOCK DIAGRAM COL1 COL2 COL3 COL4/KT COL5 XIN XOUT ROW1 ROW6 * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE EM91215CK ROW6 1 22 ROW5/SDO COL5 COL4/ COL3 ...

Page 3

PIN DESCRIPTIONS Symbol ROW1~ROW6 Keyboard scan pins of row group. In idle state (HKS is “High” and HFO is “Low”), these pins stay “High impedance” level to prevent power consumption. Otherwise, these pins switch to “High” level for detecting keyboard ...

Page 4

FUNCTION DESCRIPTIONS Dialing signal selection The EM91215 series incorporated a special keyboard scanning function that is connecting a resistor (typically is 560 Kohms) on keyboard scan pin to select many telephone specifications. The specifications are described as following : a. ...

Page 5

SAVE redial memory The SAVE meomry is designed in EM91215 series to support 32 digits capacity buffer for second redial, pager, Memory and other system applications. Storing : EM91215 series support two operating methods to store numbers into SAVE redial ...

Page 6

Indirect (two-touch) memory • To select Pulse or Tone mode. • Off-hook (or Turn on HF function), push A, n key. The numbers that are stored in indirect memory location “n” will ...

Page 7

SDO (Serial Data Output) function The SDO is serial data output which format is same as UART protocol. SDO function is designed to drive LCD driver and voice synthesizer. So the dialing numbers can be display on LCD screen with ...

Page 8

ABSOLUTE MAXIMUM RATINGS Items Power supply voltage Input voltage range Operating temperature Storage temperature Power consumption ELECTRICAL CHARACTERISTICS (Ambient temperature =2.5V unless otherwise noted, all voltages referenced Parameter Operating voltage Operating current(HKS=0) Memory ...

Page 9

ELECTRICAL CHARACTERISTIC (Ambient temperature =2.5V unless otherwise noted, all voltages referenced to Vss,Fosc=3.579545 MHz) DD Parameter Keyboard debounce time Key tone signal: frequency present duration Pause time and pulse to tone Flash time Flash pause time ...

Page 10

TIMING DIAGRAM HKS 2 KEY IN Tdb KT XMUTE PM SDO PO DTMF OSC. HKS KEY IN KT XMUTE PM SDO PO DTMF OSC. * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE ...

Page 11

LNB=2,3 HKS RD KEY IN Tdb KT XMUTE PM SDO PO DTMF OSC. LNB=2,3 HKS RD KEY IN Tdb KT XMUTE PM SDO PO DTMF OSC. * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH ...

Page 12

HKS 2 KEY IN KT XMUTE PM SDO PO Tidp DTMF OSC. HKS 2 KEY IN KT XMUTE PM SDO PO DTMF OSC. Figure 6. Pulse to Tone (P T) operating timing HKS KEY IN Tdb KT XMUTE PM SDO ...

Page 13

HKS KEY IN KT SDO <Note>L=LSB,M=MSB, sT=START bit time, spT=STOP bit time HKS HF KEY IN XMUTE HFO PM SDO PO DTMF * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE 2 Tdb ...

Page 14

APPLICATION CIRCUIT * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE HFO HFI 12 11 DTMF VSS 13 10 VDD XMUTE 14 9 HKS XOUT 15 8 ROW1 XIN 16 7 ROW2 COL1 ...

Page 15

EM32100 Application Circuit : SEG16 25 SEG15 26 SEG14 27 SEG13 28 SEG12 29 SEG11 30 SEG10 SEG9 33 SEG8 34 SEG7 35 SEG6 36 Package type : QFP 48 pins or chip form provided * This ...

Page 16

EM32116 Application Circuit : Package type : QFP 64 pins or chip form provided * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE TEST1 SEG10 F32HZ SEG11 MS1 SEG12 MS2 SEG13 SDI SEG14 ...

Page 17

PACKAGE INFORMATION Example : EM 91215 P (1) (2) (3) (1) ELAN MICRO. pefix (2) Type number (3) Package code: 18/20/28 Lead Plastic Package PDIP MILIMETERS INCHES DIM MIN. MAX. MIN. MAX 5.334 - .210 ...

Page 18

Lead Plastic Package-Skinny PDIP (skinny) MILIMETERS DIM MIN. MAX 4.752 A1 0.381 - B 0.356 0.558 B1 1.27 1.778 C 0.204 3.556 D 25.90 26.67 E 7.620 8.255 E1 6.223 6.604 e 2.286 ...

Page 19

SDIP Package DIM * This specification are subject to be changed without notice. TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE SDIP MILIMETERS MIN. MAX. MIN 5. 0.381 ...

Related keywords