ATmega328P Automotive Atmel Corporation, ATmega328P Automotive Datasheet - Page 79

• Manufacturer Part Number: ATmega328P Automotive
• Manufacturer: Atmel Corporation

Specifications of ATmega328P Automotive

• Flash (kbytes): 32 Kbytes
• Pin Count: 32
• Max. Operating Frequency: 16 MHz
• Cpu: 8-bit AVR
• # Of Touch Channels: 16
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 23
• Ext Interrupts: 24
• Usb Speed: No
• Usb Interface: No
• Spi: 2
• Twi (i2c): 1
• Uart: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 15
• Analog Comparators: 1
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 2
• Eeprom (bytes): 1024
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 125
• I/o Supply Class: 2.7 to 5.5
• Operating Voltage (vcc): 2.7 to 5.5
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 3
• Output Compare Channels: 6
• Input Capture Channels: 1
• Pwm Channels: 6
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

7810A–AVR–11/09
• ADC1/PCINT9 – Port C, Bit 1
PC1 can also be used as ADC input Channel 1. Note that ADC input channel 1 uses analog
power.
PCINT9: Pin Change Interrupt source 9. The PC1 pin can serve as an external interrupt source.
• ADC0/PCINT8 – Port C, Bit 0
PC0 can also be used as ADC input Channel 0. Note that ADC input channel 0 uses analog
power.
PCINT8: Pin Change Interrupt source 8. The PC0 pin can serve as an external interrupt source.
Table 13-7
shown in
Table 13-7.
Note:
Signal
Name
PUOE
PUOV
DDOE
DDOV
PVOE
PVOV
DIEOE
DIEOV
DI
AIO
1. When enabled, the 2-wire Serial Interface enables slew-rate controls on the output pins PC4
Figure 13-5 on page
PC6/RESET/PCINT14
RSTDISBL
1
RSTDISBL
0
0
0
RSTDISBL + PCINT14 •
PCIE1
RSTDISBL
PCINT14 INPUT
RESET INPUT
and PC5. This is not shown in the figure. In addition, spike filters are connected between the
AIO outputs shown in the port figure and the digital logic of the TWI module.
and
Overriding Signals for Alternate Functions in PC6..PC4
Table 13-8
relate the alternate functions of Port C to the overriding signals
72.
PC5/SCL/ADC5/PCINT13
TWEN
PORTC5 • PUD
TWEN
SCL_OUT
TWEN
0
PCINT13 • PCIE1 + ADC5D
PCINT13 • PCIE1
PCINT13 INPUT
ADC5 INPUT / SCL INPUT
ATmega328P [Preliminary]
PC4/SDA/ADC4/PCINT12
PCINT12 • PCIE1 + ADC4D
TWEN
PORTC4 • PUD
TWEN
SDA_OUT
TWEN
0
PCINT12 • PCIE1
PCINT12 INPUT
ADC4 INPUT / SDA INPUT
(1)
79