120672-1 TE Connectivity, 120672-1 Datasheet - Page 3

• Manufacturer Part Number: 120672-1
• Manufacturer: TE Connectivity

Specifications of 120672-1

• Product Type: Connector
• Connector Type: Header
• Pcb Mounting Orientation: Vertical
• Module Type: Left
• Solder Tail Contact Plating: Tin-Lead over Nickel
• Termination Post Length (mm [in]): 3.70 [0.146]
• Card Slot Pitch (mm [in]): 17.8 [0.7]
• Rows Per Connector: 10
• Columns Per Connector: 5
• Number Of Signal Contacts: 50
• Centerline (mm [in]): 2.00 [0.079]
• Contact Type: Pin
• Contact Style: Press Fit, Short Tail
• Guide Pin Style: Universal Power Module
• Contact Base Material: Phosphor Bronze
• Contact Configuration: Grounding
• Contact Mating Area Length (mm [in]): 8.20 [0.323]
• Contact Plating, Mating Area, Material: Conforms to Performance Requirements of TE Connectivity Product Specification 108-1957; Based on Telcordia GR-1217-CORE, Applications in Uncontrolled Environments
• Connector Style: Plug
• Housing Material: Polyester GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant

Rev C
Vibration, sinusoidal.
Mechanical shock, specified pulse.
Durability.
Mating force.
Unmating force.
Compliant pin insertion force.
Compliant pin retention force.
Minute disturbance.
Thermal shock.
Test Description
No discontinuities of 1 microsecond
or longer duration.
See Note.
No discontinuities of 1 microsecond
or longer duration.
See Note.
See Note.
0.75 N [.17 lb] maximum per
contact.
0.15 N [.03 lb] minimum per
contact.
27 N [6 lb] maximum for Eye-of-the-
Needle pin.
49 N [11 lb] maximum for ACTION
PIN* contact.
4.4 N [1 lb] minimum per pin
average.
See Note.
See Note.
Figure 1 (continued)
ENVIRONMENTAL
MECHANICAL
Requirement
EIA-364-28, Condition I.
Subject mated specimens to 10-
500-10 Hz traversed in 1 minute
with 1.5 mm [.06 in] maximum total
excursion. 8 hours in each of 3
mutually perpendicular planes.
See Figure 4.
EIA-364-27, Condition A.
Subject mated specimens to 50 G's
half-sine shock pulses of 11
milliseconds duration. 3 shocks in
each direction applied along 3
mutually perpendicular planes, 18
total shocks.
See Figure 4.
EIA-364-9.
Mate and unmate specimens for
125 cycles at a maximum rate of
600 cycles per hour.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-13.
Measure force necessary to
unmate specimens at a maximum
rate of 12.7 mm [.5 in] per minute.
Measure force necessary to seat
pins to printed circuit board at a
maximum rate of 12.7 mm [.5 in]
per minute.
Measure force necessary to unseat
pins from the printed circuit board
at a maximum rate of 12.7 mm [.5
in] per minute.
Unmate and mate each connector
pair a distance of approximately 0.1
mm [.0039 in].
EIA-364-32.
Subject mated specimens to 10
cycles between -65 and 125° C.
Procedure
108-1957
3 of 7