2-1375820-1 TE Connectivity, 2-1375820-1 Datasheet - Page 2

• Manufacturer Part Number: 2-1375820-1
• Manufacturer: TE Connectivity

Specifications of 2-1375820-1

• Connector Type: Housing
• Product Line: CST-100 II
• Termination Method To Wire/cable: Crimp
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Panel Mount Retention: Without
• Number Of Positions: 21
• Centerline (mm [in]): 2.54 [0.100]
• Cable Exit Angle: 180°
• Contact Type: Socket
• Connector Style: Receptacle
• Housing Color: White
• Mating Alignment: With
• Ul Flammability Rating: UL 94V-0
• Housing Material: Polymer
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Application Use: Wire-to-Board

3.2.
3.3.
3.4.
3.5.
Initial examination of product.
Final examination of product.
Low level contact resistance.
Insulation resistance.
Withstanding voltage.
Temperature rise vs current.
Sinusoidal vibration.
Rev D
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
!
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions.
Test Requirements and Procedures Summary
Test Description
Voltage: 250 volts AC
Current: See Figure 3
Temperature: -55 to 105° C
Meets requirements of product
drawing and Application
Specification 114-13036.
Meets visual requirements.
10 milliohms maximum final.
1000 megohms minimum initial.
100 megohms minimum final.
One minute hold with no breakdown
or flashover.
1.3 milliamperes maximum leakage
current.
30° C maximum temperatur e rise at
specified current.
No discontinuities of 1 microsecond
or longer duration.
See Note.
Figure 1 (continued)
MECHANICAL
ELECTRICAL
Requirement
EIA-364-18.
Visual and dimensional inspection
per product drawing.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specimens to 100
milliamperes maximum and 20
millivolts maximum open circuit
voltage.
EIA-364-21.
Test between adjacent contacts.
EIA-364-20.
1000 volts AC at sea level.
Test between adjacent contacts.
EIA-364-70.
Stabilize at a single current level
until 3 readings at 5 minute intervals
are within 1° C.
See Figure 3.
EIA-364-28, Condition I.
Subject mated specimens to 10-55-
10 Hz traversed in 1 minute with 1.5
mm [0.06 in] maximum total
excursion. 2 hours in each of 3
mutually perpendicular planes.
See Figure 4.
Procedure
108-1948
2 of 8