STM32F407VE STMicroelectronics, STM32F407VE Datasheet - Page 131

• Manufacturer Part Number: STM32F407VE
• Description: High-performance and DSP with FPU, ARM Cortex-M4 MCU with 512 Kbytes Flash, 168 MHz CPU, Art Accelerator, Ethernet
• Manufacturer: STMicroelectronics

Specifications of STM32F407VE

• Core: ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
• 3×12-bit, 2.4 Msps A/d Converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
• General-purpose Dma: 16-stream DMA controller with FIFOs and burst support
• Up To 17 Timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
• 10/100 Ethernet Mac With Dedicated Dma: supports IEEE 1588v2 hardware, MII/RMII
• Rtc: subsecond accuracy, hardware calendar

STM32F405xx, STM32F407xx
Synchronous waveforms and timings
Figure 56
Table 78
with the following FSMC configuration:
●
●
●
●
●
In all timing tables, the
FSMC_CLK = 60 MHz).
Figure 56. Synchronous multiplexed NOR/PSRAM read timings
BurstAccessMode = FSMC_BurstAccessMode_Enable;
MemoryType = FSMC_MemoryType_CRAM;
WriteBurst = FSMC_WriteBurst_Enable;
CLKDivision = 1; (0 is not supported, see the STM32F40xxx/41xxx reference manual)
DataLatency = 1 for NOR Flash; DataLatency = 0 for PSRAM
provide the corresponding timings. The results shown in these tables are obtained
through
Figure 59
T
HCLK
represent synchronous waveforms and
is the HCLK clock period (with maximum
Doc ID 022152 Rev 2
Electrical characteristics
Table 76
through
131/167