DS1747 Maxim, DS1747 Datasheet - Page 4

• Manufacturer Part Number: DS1747
• Description: The DS1747 is a full-function, year-2000-compliant (Y2KC), real-time clock/calendar (RTC) and 512k x 8 nonvolatile static RAM
• Manufacturer: Maxim

Figure 1. Block Diagram
PACKAGES
The DS1747 is available in two packages (32-pin DIP and 34-pin PowerCap module). The 32-pin DIP
style module integrates the crystal, lithium energy source, and silicon all in one package. The 34-pin
PowerCap Module Board is designed with contacts for connection to a separate PowerCap
(DS9034PCX) that contains the crystal and battery. This design allows the Power-Cap to be mounted on
top of the DS1747P after the completion of the surface mount process. Mounting the PowerCap after the
surface mount process prevents damage to the crystal and battery due to the high temperatures required
for solder reflow. The PowerCap is keyed to prevent reverse insertion. The PowerCap Module Board
and PowerCap are ordered separately and shipped in separate containers. The part number for the
PowerCap is DS9034PCX.
TIME AND DATE OPERATIONS
The contents of the time and date registers are in BCD format. The day-of-week register increments at
midnight. Values that correspond to the day of week are user-defined, but must be sequential (i.e., if 1
equals Sunday, then 2 equals Monday and so on). Illogical time and date entries result in undefined
operation.
CLOCK OPERATIONS—READING THE CLOCK
While the double-buffered register structure reduces the chance of reading incorrect data, internal
updates to the DS1747 clock registers should be halted before clock data is read to prevent reading of
data in transition. However, halting the internal clock register updating process does not affect clock
accuracy. Updating is halted when a one is written into the read bit, bit 6 of the century register (see
Table 2). As long as a one remains in that position, updating is halted. After a halt is issued, the registers
reflect the count, that is day, date, and time that was current at the moment the halt command was
issued. However, the internal clock registers of the double-buffered system continue to update so that
the clock accuracy is not affected by the access of data. All the DS1747 registers are updated
simultaneously after the internal clock register updating process has been re-enabled. Updating is within
a second after the read bit is written to zero. The READ bit must be set to a zero for a minimum of
500µs to ensure the external registers will be updated.
DS1747
Maxim
4 of 16