TLE 8263-2E Infineon Technologies, TLE 8263-2E Datasheet - Page 9

• Manufacturer Part Number: TLE 8263-2E
• Manufacturer: Infineon Technologies

Specifications of TLE 8263-2E

• Packages: PG-DSO-36
• Transceiver: High Speed CAN ISO 11898 - 5 / 2 x LIN2.1 / J2602
• Voltage Regulator Output: 2 x 200 mA + 400 mA
• Watchdog: Standard and Window Watchdog
• Quiescent Current (max.): 28 ?A (typ) Sleep Mode (5V on)
• Standby Current: 58 ?A (typ) Stop Mode (5V on)

Confidential
Pin
26
27
28
29
30
31
32
33
34
35
36
EDP
1) The exposed die pad at the bottom of the package allows better dissipation of heat from the SBC via the PCB. The exposed
Data Sheet
die pad is not connected to any active part of the IC and can be left floating or it can be connected to GND for the best EMC
performance.
Symbol
RxD
TxD
RxD
n.c.
n.c.
GND
Bus2
LH_SI
WK
Limp Home
LH_PL/Test
-
LIN2
LIN
LIN2
Function
LIN Transceiver Data Output; according to the ISO 9141 and LIN specification 2.1
as well as SAE J2602-2; push-pull output; LOW in dominant state.
LIN Transceiver Data Input; according to ISO 9141 and LIN specification 2.1 as
well as SAE J2602-2. integrated pull-up resistor.
LIN Transceiver Data Output; according to the ISO 9141 and LIN specification 2.1
as well as SAE J2602-2; push-pull output; LOW in dominant state.
Not connected
Not connected
Ground
LIN Bus 2; Bus line for the LIN interface, according to ISO 9141 and LIN
specification 2.1 as well as SAE J2602-2.
Limp Home side indicator; Side indicators 1.25Hz 50% duty cycle output; Open
drain. Active LOW.
Monitoring / Wake-Up Input; bi-level sensitive input used to monitor signals
coming from, for example, an external switch panel; also used as wake-up input;
Fail-Safe Function Output; Open drain. Active LOW.
SBC SW Development Mode entry; Connect to GND for activation; Integrated pull-
up resistor. Connect to
Limp Home Pulsed Light output: Brake/rear light 100Hz 20% duty cycle output;
Open drain. Active LOW.
Exposed Die Pad; For cooling purposes only, do not use it as an electrical ground.
V
S
9
or leave open for normal operation.
Rev. 1.0, 2009-03-31
Pin Configuration
TLE8263-2E
1)