MT16JSF25664H Micron Semiconductor Products, MT16JSF25664H Datasheet - Page 9

• Manufacturer Part Number: MT16JSF25664H
• Description: Ddr3 Sdram Sodimm
• Manufacturer: Micron Semiconductor Products

DRAM Operating Conditions
Table 8:
Design Considerations
Simulations
Power
PDF: 09005aef83364b70/Source: 09005aef83364bd3
JSF16C256x64HZ.fm - Rev. A 5/08 EN
Module and Component Speed Grades
DDR3 components may exceed the listed module speed grades
Module Speed Grade
-1G5
-1G4
-1G3
-1G1
-1G0
Recommended AC operating conditions are given in the DDR3 component data sheets.
Component specifications are available on Micron’s Web site. Module speed grades
correlate with component speed grades, as shown in Table 8.
-80C
-80B
Micron memory modules are designed to optimize signal integrity through carefully
designed terminations, controlled board impedances, routing topologies, trace length
matching, and decoupling. However, good signal integrity starts at the system level.
Micron encourages designers to simulate the signal characteristics of the system’s
memory bus to ensure adequate signal integrity of the entire memory system.
Operating voltages are specified at the DRAM, not at the edge connector of the module.
Designers must account for any system voltage drops at anticipated power levels to
ensure the required supply voltage is maintained.
2GB (x64, DR) 204-Pin Halogen-Free DDR3 SDRAM SODIMM
9
Micron Technology, Inc., reserves the right to change products or specifications without notice.
Component Speed Grade
-187E
Electrical Specifications
-15E
-187
-25E
-15F
-15
-25
©2008 Micron Technology, Inc. All rights reserved