FH28D-20S-0.5SH Hirose Electric, FH28D-20S-0.5SH Datasheet - Page 3

• Manufacturer Part Number: FH28D-20S-0.5SH
• Description: 0.5 Mm Pitch, 2.55 Mm Above The Board, Flexible Printed Circuit Flexible Flat Cable Zif Connectors
• Manufacturer: Hirose Electric

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BOperation and Precautions
1.FPC/FFC insertion procedure.
2.FPC/FFC removal
1
2
3
Connector installed on the board.
Lift up the actuator. Use thumb or index finger
Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
Rotate down the actuator until firmly closed. It is
critical that the inserted FPC/FFC is not moved and
remains fully inserted.
Fully open the actuator.
Carefully withdraw the FPC/FFC exercising caution
not to deform or damage it.
FH28 Series 0.5 mm Pitch, 2.55 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Operation
1
2
3
Do not force the actuator to open beyond its fully open
position. Do not use any type of tool to open the actuator.
Do not forcefully bend the FFC/FPC upward.
Consult FFC/FPC manufacturer for the
recommended bend radiuses.
For connectors with multiple contacts, such
as 80 pos. rotate down the actuator pushing
at both ends.
Precautions
77