BS2824 Holtek Semiconductor Inc., BS2824 Datasheet - Page 81

no-image

BS2824

Manufacturer Part Number
BS2824
Description
Touch Key Mcu
Manufacturer
Holtek Semiconductor Inc.
Datasheet
SBC A,[m]
Description
Operation
Affected flag(s)
SBCM A,[m]
Description
Operation
Affected flag(s)
SDZ [m]
Description
Operation
Affected flag(s)
SDZA [m]
Description
Operation
Affected flag(s)
SET [m]
Description
Operation
Affected flag(s)
SET [m].i
Description
Operation
Affected flag(s)
Rev. 1.00
Subtract Data Memory from ACC with Carry
The contents of the specified Data Memory and the complement of the carry flag are
subtracted from the Accumulator. The result is stored in the Accumulator. Note that if
the result of subtraction is negative, the C flag will be cleared to 0, otherwise if the result
is positive or zero, the C flag will be set to 1.
ACC
OV, Z, AC, C
Subtract Data Memory from ACC with Carry and result in Data Memory
The contents of the specified Data Memory and the complement of the carry flag are
subtracted from the Accumulator. The result is stored in the Data Memory. Note that if
the result of subtraction is negative, the C flag will be cleared to 0, otherwise if the result
is positive or zero, the C flag will be set to 1.
[m]
OV, Z, AC, C
Skip if decrement Data Memory is 0
The contents of the specified Data Memory are first decremented by 1. If the result is 0
the following instruction is skipped. As this requires the insertion of a dummy instruc-
tion while the next instruction is fetched, it is a two cycle instruction. If the result is not 0
the program proceeds with the following instruction.
[m]
Skip if [m] = 0
None
Skip if decrement Data Memory is zero with result in ACC
The contents of the specified Data Memory are first decremented by 1. If the result is 0,
the following instruction is skipped. The result is stored in the Accumulator but the spec-
ified Data Memory contents remain unchanged. As this requires the insertion of a
dummy instruction while the next instruction is fetched, it is a two cycle instruction. If
the result is not 0, the program proceeds with the following instruction.
ACC
Skip if ACC = 0
None
Set Data Memory
Each bit of the specified Data Memory is set to 1.
[m]
None
Set bit of Data Memory
Bit i of the specified Data Memory is set to 1.
[m].i
None
ACC [m] C
[m] 1
FFH
1
ACC [m] C
[m] 1
81
BS2824/BS2854/BS2868
Touch Key MCU
January 27, 2010

Related parts for BS2824