IRM-H138-TR2 Everlight Electronics Co., Ltd., IRM-H138-TR2 Datasheet - Page 9

• Manufacturer Part Number: IRM-H138-TR2
• Description: Infrared Remote-control Receiver Module
• Manufacturer: Everlight Electronics Co., Ltd.

Recommended method of storage
during storage and operation procedure. Dry box storage is recommended as soon as the aluminum
bag has been opened prevent moisture absorption. The following conditions should be observed, if
dry boxes are not available:
1. Shelf life in sealed bag: 24 months at 10℃ to 30℃ and ≦60% relative humidity (RH).
2. After this bag is opened, devices that will be subjected to infrared reflow, vapor-phase reflow, or
3. Devices require baking, before mounting, if humidity Indicator Card reads > 30% when read at
4. If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure.
Recommended Solder Profile
Notice:
Everlight Electronics Co., Ltd.
Device No
(1) Reflow soldering should not be done more than two times.
(2) When soldering, do not put stress on the IRM-V038/TR1 Series devices during heating.
(3) After soldering, do not warp the circuit board.
Due to the SMD IRM is moisture sensitive device, it must pay attention to moisture protection
equivalent processing(peak package body temp.260℃), must be:
(a) mounted within 48 hours at factory conditions of < 30℃/60% RH.
(b) stored per J-STD-033.
23℃±5℃.
192 hours at 40℃+5℃/-0℃ and 5%RH (dry air / nitrogen) or
96 hours at 60℃+5℃ and < 5%RH for all device containers or
24 hours at 125℃+5℃ not suitable for reel or tubes.
：
D MO-138-376
EVERLIGHT ELECTRONICS CO.,LTD.
Prepared date
http:\\www.everlight.com
：
7 -11-2007
IRM-H1xx/TR2 SERIES
Rev 2
Prepared by
：
Page: 9 of 12
C indy Lin