110-505-04 Marl International Limited, 110-505-04 Datasheet - Page 2
![no-image](/images/no-image-200.jpg)
110-505-04
Manufacturer Part Number
110-505-04
Description
Pcb Mounting Leds
Manufacturer
Marl International Limited
Datasheet
1.110-505-04.pdf
(3 pages)
How to Order:
website: www.marl.co.uk • email: sales@marl.co.uk •
•
The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation
relating to either products or service.
for products or service.
Polycarbonate
This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in
the majority of automatic soldering processes.
*Material test thickness 1.6mm
LED Polarity
Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For
the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign.
Reverse Polarity
This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity
connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in
reverse colour configuration.
Lead Cropping
Should lead cropping be required Marl offer two standard lengths, either by request or by adding one of the following codes to the end of the part
number:-
Bi-colour
2 Pin Operation
T o achieve the second colour for a 2 pin Bi-colour unit the supply must be reversed, standard colour configuration for these units is red anode to
the ‘+’ sign.
Electro-static Discharge (ESD)
Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing
and despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Note:
T elephone +44 (0)1229 582430
Dimensions in mm (Typical)
Not to scale
© MARL INTERNATIONAL LTD 2007 : DS 073/07
All luminous intensity figures refer to the unmodified discrete LED.
•
-24 = 3mm
Other non-standard lead lengths are available on request.
Fax: +44 (0)1229 585155
Marl International reserve the right to alter without notice the specification or any conditions of supply
Issue 2
Anode
Housing Material
-26 = 5mm (E.g
110 Series
LEDs
SAMPLES AVAILABLE
110-505-04-26)
Page 2 of
3