110-PP-210-41-001101 Precid-Dip Durtal SA, 110-PP-210-41-001101 Datasheet - Page 4

• Manufacturer Part Number: 110-PP-210-41-001101
• Description: Dil Sockets
• Manufacturer: Precid-Dip Durtal SA

WWW.PRECIDIP.COM
The values listed below are general specs applying for PRECI-DIP DIL sockets. Please see individual catalog page for additional and product
specific technical data.
OPERATING TEMPERATURE RANGE
CLIMATIC CATEGORY (IEC)
OPERATING HUMIDIT Y RANGE
MA X. WORKING VOLTAGE
MECHANICAL CHARACTERISTICS
CLIP RETENTION
CONTACT (SLEEVE / CLIP) RETENTION
ELECTRICAL CHARACTERISTICS
INSUL ATION RESISTANCE AT 500 V AC BETWEEN ANY TWO ADJACENT CONTACTS
CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS
AIR AND CREEPAGE DISTANCES BETWEEN ANY TWO ADJACENT CONTACTS
(Min. 0.2 mm FOR SHRINK-DIP SOCKETS)
ENVIRONMENTAL CHARACTERISTICS
The sockets withstand the following environmental tests without mechanical
and electrical defects:
• Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h
• Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH,
• Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h
• Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min.
• Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g,
• Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis
During the above two tests, no contact interruption >50 ns does appear.
• Solderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7
• Resistance to soldering heat J-STD-020C, 260 °C, 20 s
• Moisture sensitivity J-STD-020C level 1
• Resistance to corrosion:
SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS
PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5
• Press-in force:
• Push-out force:
• Push-out 3 rd cycle:
PCB HOLE DIMENSIONS
• 2.54 mm grid
PCB HOLE PL ATING
PCB surface finish
• Tin
• Copper
• Gold over nickel
Due to technical progress, all information provided is subject to change without prior notice.
1 cycle of 24 h
1 octave/min, 10 cycles for each axis
U L
®
PRECI-DIP sockets are recognized by Underwriters Laboratories Inc. and listed under “Connectors for Use in Data, Signal, Control and
Power Applications“, File Nr. E174442.
1) Salt spray test IEC 60068-2-11.Ka: 48 h
2) Sulfur dioxide (SO 2 ) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO 2 ,
3) Hydrogen sulfide (H 2 S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H 2 S,
25 °C, 75 %rH
25 °C, 75 %rH
TEL [phone]
90 N max. (at min. hole dia.) / 65 N typ.
30 N min. (at max. hole dia.) / 50 N typ.
20 N min. (at max. hole dia.)
Finished hole Ø: 1 + 0.09/-0.06 mm
Drilled hole Ø: 1.15 ± 0.025 mm
Hole plating
5-15 μm tin over min. 25 μm copper
min. 25 μm copper
0.05-0.2 μm gold over 2.5-5 μm nickel
over min. 25 μm copper
Min. 40 N (no displacement under axial force applied)
Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2
-55 ... +125 °C
55/125/21
Annual mean 75%
100 V
[e-mail]
RMS
/150 V
DC
Min. 10’000 MΩ
Max. 1 pF
Min. 0.6 mm
DIL SOCKETS
GENERAL SPECIFICATIONS
PACKAGING
• Standard packaging for DIL sockets is tube
• SMD mount sockets available on request
Please consult www.precidip.com for availability,
size of tape, size of reel, number of components
per reel and packing units.
T & R Packaging
packaging.
with Tape & Reel packaging acc. to EIA Standard 481.
These products are marked with the symbol:
127