CSD-892-73 Minebea, CSD-892-73 Datasheet - Page 5

• Manufacturer Part Number: CSD-892-73
• Description: Digital Conversion Module
• Manufacturer: Minebea

２-７.CC-Link interface
• Version of CC-Link
• Specifications
• Connector configuration of CC-Link
• Function
* CC-Link is abbreviation of Control & Communication Link.
* Suitable plug for CC-Link connector plug : MSTB 2, 5/5-ST-5, 08 ABGY AU (made by Phoenix Contact.)
* “SLD” and “FG” are connected in the instrument.
(1) Reading out the load.
(2) Actual load calibration.
(3) Reading out the condition
(4) Changing the condition
(5) Reading out the setting of basic function, I/O, measurement operation and sequence control.
(6) Changing the setting of basic function, I/O, measurement operation and sequence control.
MINEBEA Co., Ltd. Measuring Components Business Unit
Specifications
Occupied stations Nos.
Baud rate
Communication method : Poling method
Synchronous method
Transmission route
Transmission format
Remote station
Connectable units
Connectable cable
Termination
Status LED
Pin No.
1
2
3
4
5
Signal name
SLD
DG
DA
DB
FG
: Ver.1.10
: Selectable from 1, 2 or 4 stations.
: Selectable from 156 kbps, 625 kbps, 2.5 Mbps, 5 Mbps or 10 Mbps.
: Bit synchronous method
: RS-485 bus
: HDLC comforming
: 01 to 64 when one station is occupied.
: 64 units at maximum with occupied one station.
: Shielded twist pair special cable for “CC-Link”
: Attached with 110 ohm resistance externally.
: Display the communication status by four (4)
01 to 63 when two stations are occupied.
01 to 61 when four stations are occupied.
32 units at maximum with occupied two stations.
16 units at maximum with occupied four stations.
LEDs of “RUN” ,“ERR”, “SD” and “RD”.
Signal cable at DA side
Signal cable at DB side
Signal cable ground
Frame ground
Signal name
Shield
www.DataSheet.co.kr
Spec. No.EN382892-73A
CSD-892-73
Revised in Mar 2012
5/8
Datasheet pdf - http://www.DataSheet4U.net/