MB3828 Fujitsu Microelectronics, Inc., MB3828 Datasheet - Page 24

• Manufacturer Part Number: MB3828
• Description: Pentium DC/DC Converter ic
• Manufacturer: Fujitsu Microelectronics, Inc.

24
MB3828
1. Device settings must not exceed absolute maximum ratings.
2. Devices should be used within recommended operating conditions.
3. Printed circuit board ground lines should be designed in consideration of common
4. Observe precautions against static electricity.
MB3828 PFV-G-BND
• Containers in which semiconductors are placed should either be protected against static electricity, or be of
• After mounting of devices, use conductive bags or conductive containers when storing or transporting printed
• Working surfaces, tools and instruments should be properly grounded.
• Workers should be grounded by a ground line with 250 k to 1 M resistance in series between the worker
ORDERING INFORMATION
USAGE PRECAUTIONS
Usage under conditions exceeding absolute maximum ratings may permanently damage LSI devices.
Note also that in normal operation usage within recommended operating conditions is preferred, and that the
reliability of LSI devices may be adversely affected when used outside these conditions.
Recommended operating conditions are recommended values within which the LSI device is warranted to
operate normally.
Rated values of electrical characteristics are warranted within the range of recommended operating conditions
and within the conditions listed in the condition column for each parameter.
impedance values.
conductive material.
circuit boards.
and ground.
Part number
24-pin Plastic SSOP
(FPT-24P-M03)
Package
Remarks