DF13A-10DP-1.25C Hirose Electric, DF13A-10DP-1.25C Datasheet - Page 11

• Manufacturer Part Number: DF13A-10DP-1.25C
• Description: 1.25mm Pitch Miniature Crimping Connector
• Manufacturer: Hirose Electric

BPrecautions
1. Recommended Temperature
2. Recommended Soldering
3. Recommended Screen
4. Board Warpage (SMT)
5. Recommended Soldering
5.
6. Cleaning Condition
7. Connection Condition
8. Cautions
Profile (SMT)
Condition (SMT)
Thickness (SMT)
Condition (Through hole)
Note 1.This process is allowed up to twice under the same condition.
Note 2.The temperature indicates the board surface temperature in the connector lead area.
0.15
Max 0.03mm in the connector center area, based on both connector edges
Refer to Nylon Connector Use Hand book.
Refer to Nylon Connector Use Hand book.
Carefully carry out the crimping operation according to "Crimping Condition Sheet" and
"Crimping Quality Standard", because the crimping contact is an extremely small style.
Be careful for the excessive scoop insertion/extraction, which will cause damage to the
product.
However, the interval between the first and second processes must be maintained at
the room temperature.
0.2mm
B193