LM057QCTT03 Sharp Microelectronics of the Americas, LM057QCTT03 Datasheet - Page 7

• Manufacturer Part Number: LM057QCTT03
• Description: Device Specification For Passive Matrix LCD Module
• Manufacturer: Sharp Microelectronics of the Americas

SHARP
Assembling
*
4. Operating instruction
2. Handling
3. Assembling
1. Unpacking
b) Do not stack up the LCD module. Do not place anything on the LCD module. It may cause scratch,
c) Wipe a dirt on the screen with dry soft cloth If it is still sticked, wipe it out with soft cloth with
a) Do not pick up the visible area or flexible tail.
c) If a chemical material stays on the touch panel for long period of time, front film may be swelled
b) Be careful not to scratch the front of touch pane1 during assembly process.
b) Do not expose the LCD module to the direct sun-light for long period of time. Polyester film is
a) Use a finger or a polyacetal pen to access to touch panel. The surface of the touch panel film
a) Do not hold nor pull flex cable. otherwise it may cause a breakage of the flex.
b) Glass edge of touch pane1 is not treated It is sharp edge and it may cause an injury when handled
a) Be careful not to apply excessive distortion on heat sealed area of the flex cable. It may cause a
and may cause a functional error. If it is planned to be used under severer circumstances, very
careful protection is required
used as the front film of the touch panel, exposure to direct sun-light for long time may cause
a discoloration
by bare hands. Wear finger sacks or groves and handle with extra care.
functional error.
is hard coat treated. This hard coating may be damaged if it is touched by a ball-point
metal piece.
ethyl alcohol. Upper electrode film and lower electrode glass of touch panel are fixed by adhesive
and there is a ventilation hole in between. Be careful not to have ethyl alcohol may penetrate into
deformation
touch panel. It may cause a functional error.
LCD module with touch panel
or breakage.
SPEC
LC99908
No.
iMODEL
LM057QCTT03
No.
PAGE
pen or
5