LPC2141FBD64 Philips Semiconductors (Acquired by NXP), LPC2141FBD64 Datasheet - Page 19

no-image

LPC2141FBD64

Manufacturer Part Number
LPC2141FBD64
Description
Manufacturer
Philips Semiconductors (Acquired by NXP)
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC2141FBD64
Manufacturer:
NXP
Quantity:
2 001
Part Number:
LPC2141FBD64
Manufacturer:
NXP/恩智浦
Quantity:
20 000
Part Number:
LPC2141FBD64,151
Manufacturer:
NXP Semiconductors
Quantity:
10 000
Philips Semiconductors
9397 750 14985
Preliminary data sheet
6.16.1 Features
6.17.1 Features
6.16 Watchdog timer
6.17 Real-time clock
The purpose of the watchdog is to reset the microcontroller within a reasonable amount of
time if it enters an erroneous state. When enabled, the watchdog will generate a system
reset if the user program fails to ‘feed’ (or reload) the watchdog within a predetermined
amount of time.
The RTC is designed to provide a set of counters to measure time when normal or idle
operating mode is selected. The RTC has been designed to use little power, making it
suitable for battery powered systems where the CPU is not running continuously (Idle
mode).
– Reset timer on match with optional interrupt generation.
Four external outputs per timer/counter corresponding to match registers, with the
following capabilities:
– Set LOW on match.
– Set HIGH on match.
– Toggle on match.
– Do nothing on match.
Internally resets chip if not periodically reloaded.
Debug mode.
Enabled by software but requires a hardware reset or a watchdog reset/interrupt to be
disabled.
Incorrect/Incomplete feed sequence causes reset/interrupt if enabled.
Flag to indicate watchdog reset.
Programmable 32-bit timer with internal pre-scaler.
Selectable time period from (T
T
Measures the passage of time to maintain a calendar and clock.
Ultra-low power design to support battery powered systems.
Provides Seconds, Minutes, Hours, Day of Month, Month, Year, Day of Week, and Day
of Year.
Can use either the RTC dedicated 32 kHz oscillator input or clock derived from the
external crystal/oscillator input at XTAL1. Programmable reference clock divider
allows fine adjustment of the RTC.
Dedicated power supply pin can be connected to a battery or the main 3.3 V.
PCLK
4.
Rev. 01 — 3 October 2005
PCLK
256
LPC2141/42/44/46/48
Single-chip 16-bit/32-bit microcontrollers
4) to (T
PCLK
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
2
32
4) in multiples of
19 of 38

Related parts for LPC2141FBD64