BSP75-AE6327 Infineon Technologies Corporation, BSP75-AE6327 Datasheet - Page 9

• Manufacturer Part Number: BSP75-AE6327
• Description: HitFET Smart Low Side Power Switch
• Manufacturer: Infineon Technologies Corporation

HITFET ® BSP 75A
Package and ordering code
all dimensions in mm
SOT223/4
Ordering code
BSP75
Q67060-S7200-A2
Definition of soldering point with temperature T
:
s
upper side of solder edge of device pin 4.
Pin 4
Edition 7.97
Published by Siemens AG,
Bereich Halbleiter Vetrieb,
Werbung, Balanstraße 73,
81541 München
©
Siemens AG 1997
All Rights Reserved.
Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, The information describes a type
of component and shall not be considered as warranted characteristics. Terms of delivery and rights to change design reserved. For que-
stions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens Companies and
Representatives worldwide (see address list). Due to technical requirements components may contain dangerous substances. For informa-
tion on the types in question please contact your nearest Siemens Office, Semiconductor Group. Siemens AG is an approved CECC ma-
nufacturer.
Packing
Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will
take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incur-
red.
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components 1 of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems 2 with the express
written approval of the Semiconductor Group of Siemens AG.
1)A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failu-
re of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2)Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain and/or
protecf human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.
Semiconductor Group
Page 9
1998-11-25